What is the correct ORFS sleeve for metric tube, stainless steel, type FM size for a tubing with inner diameter D1 [mm] and outer diameter D2 [mm]?

ORFS sleeve for metric tube, stainless steel, type FM Format To select the correct ORFS sleeve for metric tube, stainless steel, type FM, you need the tubeâs inner diameter D1 [mm] and outer diameter D2 [mm]. Use the following rule: - Confirm material AISI 316 (stainless steel) and type FM. - Match the sleeve whose specified tube outer diameter range includes your D2. The sleeve is sized to fit the tube outer diameter (D2); inner diameter D1 is only for tube wall verification and must satisfy D2 â 2Ã(wall thickness) = D1. - If your D2 equals a nominal sleeve size, choose that sleeve. If D2 lies between two nominal sizes, choose the next larger sleeve to ensure proper fit and swaging. - Verify clearance: the sleeve inside bore must be â¥ D2 and allow for swaging deformation per manufacturer tolerances. Example selection steps: 1. Measure D2 precisely. 2. Consult the ORFS sleeve for metric tube, stainless steel, type FM Format sizing table and find the sleeve where bore/nominal tube OD = your D2 (or the next larger nominal OD if D2 is intermediate). 3. Confirm D1 corresponds to the tube wall thickness expected for that OD (D1 = D2 â 2Ãwall). If you provide numeric D1 and D2, I will pick the exact sleeve size from the ORFS sleeve for metric tube, stainless steel, type FM Format table.

Which ORFS sleeve for metric tube, stainless steel, type FM fits a tube with inner diameter D1 [mm] and outer diameter D2 [mm]?

ORFS sleeve for metric tube, stainless steel, type FM Format that fits a tube with inner diameter D1 [mm] and outer diameter D2 [mm] is the sleeve specified for tube OD = D2 mm and ID = D1 mm. Select the FM sleeve size whose listed inner bore matches the tube outer diameter (D2) and whose internal counterbore/relief accommodates the tube wall defined by D1. Material: AISI 316 stainless steel. If exact FM sleeve dimensions table is available, choose the entry with bore = D2 mm; ensure sleeve ID â¥ D1 and sleeve bore tolerance matches the tube OD for proper sealing.

Which ORFS sleeve for metric tube, stainless steel, type FM matches a tube with inner D1 [mm] and outer D2 [mm]?

To select the correct ORFS sleeve for metric tube, stainless steel, type FM that matches a tube with inner diameter D1 [mm] and outer diameter D2 [mm], use the sleeve specification given in "ORFS sleeve for metric tube, stainless steel, type FM Format". The sleeve must fit the tube outer diameter D2 and accommodate the tube wall thickness (D2 â D1)/2. Choose the FM sleeve whose listed inner bore equals or slightly exceeds your tube outer diameter D2 and whose recommended tube wall range includes your tube wall thickness. Material is AISI 316 steel.

ORFS sleeve for metric tube, stainless steel, type FM

Additional information

Material	SS – stainless steel
Standard length [m]	10

ORFS sleeve for metric tubing, type FM. Diameter D1 [mm] – inner diameter. Diameter D2 [mm] – outer diameter. Material: AISI 316 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HO-FM-06-SS	ORFS sleeve for 6 mm tube, AISI 316	6	-	In stock	Enquiry
HO-FM-08-SS	ORFS sleeve for 8 mm tube, AISI 316	8	-	In stock	Enquiry
HO-FM-10-SS	ORFS sleeve for 10 mm tube, AISI 316	10	-	In stock	Enquiry
HO-FM-12-SS	ORFS sleeve for 12 mm tube, AISI 316	12	-	In stock	Enquiry
HO-FM-14-SS	ORFS sleeve for 14 mm tube, AISI 316	14	-	In stock	Enquiry
HO-FM-15-SS	ORFS sleeve for 15 mm tube, AISI 316	16	-	In stock	Enquiry
HO-FM-16-SS	ORFS sleeve for 16 mm tube, AISI 316	16	-	In stock	Enquiry
HO-FM-18-SS	ORFS sleeve for 18 mm tube, AISI 316	18	-	In stock	Enquiry
HO-FM-20-SS	ORFS sleeve for 20 mm tube, AISI 316	20	-	In stock	Enquiry
HO-FM-22-SS	ORFS sleeve for 22 mm tube, AISI 316	22	-	In stock	Enquiry
HO-FM-25-SS	ORFS sleeve for 25 mm tube, AISI 316	25	-	In stock	Enquiry
HO-FM-28-SS	ORFS sleeve for 28 mm tube, AISI 316	28	-	In stock	Enquiry
HO-FM-30-SS	ORFS sleeve for 30 mm tube, AISI 316	30	-	In stock	Enquiry
HO-FM-32-SS	ORFS sleeve for 32 mm tube, AISI 316	32	-	In stock	Enquiry
HO-FM-35-SS	ORFS sleeve for 35 mm tube, AISI 316	35	-	In stock	Enquiry
HO-FM-38-SS	ORFS sleeve for 38 mm tube, AISI 316	38	-	In stock	Enquiry