Is the Plate adaptor for connecting NG6 valves, steel supplied with O-rings or are they sold separately?

Plate adaptor for connecting NG6 valves, steel is supplied without O-rings. O-rings are sold separately.

Does the Plate adaptor for connecting NG6 valves, steel fit NG10 connection blocks or only NG6 valves?

Plate adaptor for connecting NG6 valves, steel fits both: it is designed to connect an NG6 valve (distributor) to a connection plate (connection block) or to an NG10 valve. Supplied without Oârings; steel construction; max working pressure 315 bar; flow rate 40 l/min; operating temperatures â20Â°C to +80Â°C (medium) and â20Â°C to +50Â°C (environment).

Can the Plate adaptor for connecting NG6 valves, steel withstand hydraulic fluids at +80Â°C without performance loss?

Yes. the Plate adaptor for connecting NG6 valves, steel can withstand hydraulic fluids at +80Â°C without performance loss, provided system limits are respected. The datasheet specifies an operating temperature for the medium from -20Â°C to +80Â°C, so exposure of the fluid to +80Â°C falls within the stated allowable medium temperature range. Also note the other specified limits: maximum working pressure 315 bar and flow rate 40 l/min. Caveats: - The adaptor is supplied without O-rings. compatibility and temperature rating of any O-rings/seals you install must match +80Â°C and the hydraulic fluid to avoid leaks or degradation. - The environment temperature rating is -20Â°C to +50Â°C; if the surrounding ambient temperature exceeds +50Â°C, external components or installation may be affected. - Verify material and fluid compatibility for prolonged exposure at high temperature in your specific application and consider thermal expansion, seal aging, and system pressure/flow transients.

Plate adaptor for connecting NG6 valves, steel

All products, Valves and plate adapters/

Additional information

Material	CS – steel (cast iron)

Plate adaptor designed for connecting a valve (distributor) NG6 to a connection plate (connection block) or valve NG10. Supplied without O-rings. Material: steel. Maximum working pressure: 315 bar. Flow rate: 40 l/min. Operating temperature: from -20°C to +80°C (medium), from -20°C to +50°C (environment).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
TL-PNG10-6	NG6 / NG10 reduction adapter	-	315	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Plate adaptor designed for connecting a valve (distributor) NG6 to a connection plate (connection block) or valve NG10. Supplied without O-rings. Material: steel. Maximum working pressure: 315 bar. Flow rate: 40 l/min. Operating temperature: from -20°C to +80°C (medium), from -20°C to +50°C (environment).