Is Plug for UHP with GZ, black galvanized steel, type 199501600 suitable for repeated use at 3000 bar without retightening or seal replacement?

No. Plug for UHP with GZ, black galvanized steel, type 199501600 is specified for a working pressure of 3000 bar and seals on an external 120Â° cone, but the description does not state suitability for repeated use without retightening or seal replacement. At ultra-high pressure (3000 bar) repeated make/break cycles typically require either specially designed reusable seals and threads or replacement of sealing elements and re-torquing to maintain leak-free performance. Without explicit manufacturer confirmation that the plug and its sealing system are rated for multiple cycles without retightening or seal change, you should assume retightening and periodic seal replacement are necessary for safe, reliable operation. For definitive guidance, contact the manufacturer or consult detailed technical documentation and cycle-life testing data.

Can Plug for UHP with GZ, black galvanized steel, type 199501600 be used safely at 3000 bar in connection blocks with external BSP thread sealing on a 120Â° cone?

Yes. Plug for UHP with GZ, black galvanized steel, type 199501600 is specified for UHP installations with external BSP thread sealing on a 120Â° cone and a working pressure of 3000 bar, so it can be used safely at 3000 bar in connection blocks designed for external BSP thread sealing on a 120Â° cone, provided the mating connection block and installation practices (thread engagement, surface condition, torque, sealing compatibility) are rated and prepared for 3000 bar as well.

Does Plug for UHP with GZ, black galvanized steel, type 199501600 require specific torque values for safe use at 3000 bar?

Plug for UHP with GZ, black galvanized steel, type 199501600: Based on the provided description (Plug (blind cap) with external BSP thread sealing on an external 120Â° cone, intended for UHP installations, material black galvanized steel, working pressure 3000 bar), the documentation excerpt does not specify any particular torque values. However, safe use at 3000 bar typically requires following manufacturer torque recommendations for the BSP thread and cone seating to ensure proper sealing and to avoid thread or seal damage. Without explicit torque data for Plug for UHP with GZ, black galvanized steel, type 199501600, you should: - Consult the manufacturerâs technical datasheet or installation manual for specified tightening torque. - If manufacturer values are unavailable, use standard torque tables for the specific BSP thread size and material, adjusted conservatively for high-pressure UHP service and galvanised steel. - Use proper assembly practice: clean threads, apply compatible thread lubricant if recommended, tighten progressively and verify leak-tightness under controlled conditions. - Consider using a calibrated torque wrench and, for critical UHP installations, validate assembly by pressure testing at or above operating pressure. Do not assume safe operation at 3000 bar without confirmed torque specifications from the manufacturer or qualified engineering guidance.

Plug for UHP with male, black-zinc-plated steel, type 199501600

All products, UHP adapters and accessories/

Additional information

Material	CS – steel (cast iron)

Plug (cap) with a BSP male thread (sealing on the external 120° cone) intended for UHP installations (connection blocks). Material: black-zinc-plated steel. Working pressure: 3000 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
CJ-HP-199501600	Plug with 1/4" BSP male, 3000 bar	-	3000	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Plug (cap) with a BSP male thread (sealing on the external 120° cone) intended for UHP installations (connection blocks). Material: black-zinc-plated steel. Working pressure: 3000 bar.