Is the Quick connector DN1.5 bulkhead miniature universal, with hose end, brass, 02KA series compatible with both air and liquid applications at 35 bar?

Yes. Quick connector DN1.5 bulkhead miniature universal, with hose end, brass, 02KA series is specified for air, inert gases, and liquids, with a working pressure of 35 bar and operating temperature range â20Â°C to +100Â°C, so it is compatible with both air and liquid applications at 35 bar. Note that material options (brass or nickel-plated brass) and the intended media (air, inert gases, liquids) are stated; ensure chemical compatibility of the specific liquid with brass or nickel plating for your application.

Can the Quick connector DN1.5 bulkhead miniature universal, with hose end, brass, 02KA series be used with inert gases and liquids across -20Â°C to +100Â°C?

Yes. The Quick connector DN1.5 bulkhead miniature universal, with hose end, brass, 02KA series is specified for air, inert gases, and liquids, with an operating temperature range of -20Â°C to +100Â°C and a working pressure up to 35 bar. It is available in uncoated brass or nickel-plated brass, so it is suitable for use with inert gases and liquids within that temperature and pressure range.

Does the Quick connector DN1.5 bulkhead miniature universal, with hose end, brass, 02KA series require special maintenance for use with liquids?

Quick connector DN1.5 bulkhead miniature universal, with hose end, brass, 02KA series does not require special maintenance beyond standard good-practice measures for brass fittings used with liquids. Recommended care: - Regular inspection: check for visible wear, deformation, corrosion or damage to the hose end and sealing surfaces. - Cleanliness: flush with compatible, clean fluid before use and periodically to remove sediments or contaminants. - Seals: if any Oârings or seals are fitted in your system, inspect and replace them when worn; use materials compatible with the liquid. - Tightening and mounting: ensure proper installation at the bulkhead and hose connection to avoid leaks; avoid overtightening which can deform components. - Corrosion monitoring: although brass (and nickel-plated brass option) resists corrosion, monitor for dezincification or corrosion when used with aggressive or high-chloride fluids and replace if signs appear. - Temperature and pressure limits: operate within specified range (â20Â°C to +100Â°C and up to 35 bar). Avoid pressure spikes, freezing, or overheating. - Compatibility check: confirm the liquid is chemically compatible with brass/nickel plating and any seal materials; for highly corrosive media consider alternative materials or protective measures. Following these routine checks and compatibility precautions will keep Quick connector DN1.5 bulkhead miniature universal, with hose end, brass, 02KA series functioning reliably with liquids.

Quick connector DN1.5 bulkhead miniature universal, with hose end, brass, 02KA series

All products, General-purpose low-pressure quick couplings/

Additional information

Material	B – brass (bronze)

Miniature quick-connect plug DN1.5, without valve, with hose end, for air, inert gases, and liquids, where small dimensions are required. Available in two variants: uncoated brass and nickel-plated brass. Working pressure: 35 bar. Operating temperature: from -20°C to +100°C. Material: brass or nickel-plated brass.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RE-02SFTS02MXN	Quick coupling plug 02 DN1.5, for 2 mm hose, partition, nickel-plated brass	2	35	In stock	Enquiry
RE-02SFTS02MXX	Quick coupling plug 02 DN1.5, for 2 mm hose, partition, brass	2	35	In stock	Enquiry
RE-02SFTS03MXX	Quick coupling plug type 02 DN 1.5 with end for 3 mm hose, partition, brass	3	35	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Miniature quick-connect plug DN1.5, without valve, with hose end, for air, inert gases, and liquids, where small dimensions are required. Available in two variants: uncoated brass and nickel-plated brass. Working pressure: 35 bar. Operating temperature: from -20°C to +100°C. Material: brass or nickel-plated brass.