Is the NiTO 3/4" water quick connector plug with hose end, brass suitable for use at working pressures up to 25 bar and temperatures up to +80Â°C?

Yes. The NiTO 3/4" water quick connector plug with hose end, brass is specified for working pressures up to 25 bar and operating temperatures up to +80Â°C, so it is suitable for use within those limits.

Can the NiTO 3/4" water quick connector plug with hose end, brass be used with stainless steel braided hoses and fittings?

Yes - the NiTO 3/4" water quick connector plug with hose end, brass can be used with stainless steel braided hoses and fittings, provided they match the 3/4" hose/end dimensions and pressure/temperature limits. The connector is chrome-plated brass, rated to 25 bar and up to +80Â°C, so ensure the braided hose and fittings are rated at or above those limits and have compatible thread/hose tail sizes. Also confirm sealing method (hose clamp, crimp ferrule or threaded adapter) and use appropriate corrosion-resistant fittings and seals for stainless steel assemblies to maintain leak-free connections.

Does the NiTO 3/4" water quick connector plug with hose end, brass require lubrication or maintenance for reliable operation?

No regular lubrication is required for the NiTO 3/4" water quick connector plug with hose end, brass for normal use. Chrome-plated brass components and seals used in water quick-connect fittings are typically designed to operate reliably without added oils or greases, which can attract dirt or degrade rubber seals. Recommended maintenance for reliable long-term operation: - Rinse or wipe the exterior periodically to remove dirt and mineral deposits. - Inspect the sealing O-ring or gasket occasionally for wear, cuts or hardening; replace if damaged. - Check for corrosion or pitting on mating surfaces and the chrome plating; replace the unit if plating is significantly compromised. - If operation becomes stiff due to scale buildup, flush with clean water and, if needed, remove deposits with a mild descaler compatible with brass; avoid aggressive acids. - Ensure quick-connect couplings are clean and free of debris before connecting to prevent seal damage. - Operate the connector under the specified limits (â¤25 bar, â¤+80Â°C) to avoid premature seal or component failure. If a lubricant is ever needed (e.g., during seal replacement), use a water-compatible, non-petroleum-based silicone grease approved for rubber O-rings; avoid petroleum-based lubricants that can swell or degrade elastomers.

NiTO 3/4″ water quick connector plug with hose end, brass

All products, Quick couplings for water/

Additional information

Material	B – brass (bronze)

High-quality quick-connect water plug NiTO 3/4″ with hose end. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
NT-63600A3	3/4" quick coupling plug with 3/4" hose end, chrome-plated brass	20	25	In stock	Enquiry
NT-6360BA3	3/4" quick coupling plug with 1/2" hose end, chrome-plated brass	12	25	In stock	Enquiry
NT-6360CA3	3/4" quick coupling plug with a 5/8" hose end, chrome-plated brass	16	25	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High-quality quick-connect water plug NiTO 3/4″ with hose end. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +80°C.