Is the Quick-connection socket DN10, with hose socket, stainless steel, series 27KA suitable for continuous operation at -15Â°C to +200Â°C with media other than air?

Quick-connection socket DN10, with hose socket, stainless steel, series 27KA Format: The product sheet states an operating temperature range from -15Â°C to +200Â°C "depending on the medium." That means the component materials (AISI 316Ti/316, FKM seals) can tolerate that span, but suitability for continuous operation with a specific medium must be confirmed case-by-case. Key points to check before assuming continuous use with media other than air: - Chemical compatibility: FKM seals resist many oils and fuels but are not compatible with some aggressive chemicals (strong acids, ketones, amines, steam at high temperature, etc.). Verify the medium against FKM and stainless steel compatibility tables. - Pressure and temperature combined: rated working pressure is 35 bar; flow data given for air. Ensure your operating pressure and temperature together do not exceed material/ seal limits or cause accelerated degradation. - Continuous high-temperature exposure: FKM can approach its service limits near +200Â°C; long-term exposure may reduce seal life.consider higher-temperature elastomers if needed. - Low-temperature hardness: at -15Â°C FKM remains elastic for many applications, but confirm dynamic sealing performance with your fluid and cycle frequency. - Media properties: abrasive, corrosive, or polymerizing fluids can impair valves and sealing surfaces over time. Conclusion: Quick-connection socket DN10, with hose socket, stainless steel, series 27KA Format may be suitable for continuous operation at -15Â°C to +200Â°C with media other than air only if the chosen medium is chemically compatible with AISI 316/316Ti and FKM and operating pressure/temperature cycles are within allowable limits. For critical or continuous-use applications, perform material compatibility checks and life testing or consult the manufacturer for medium-specific approval.

Can the Quick-connection socket DN10, with hose socket, stainless steel, series 27KA withstand 35 bar working pressure in heavy industry applications?

Yes. Quick-connection socket DN10, with hose socket, stainless steel, series 27KA Format is specified for heavy industry use and lists a working pressure of 35 bar. Constructed from AISI 316Ti/316 stainless steel with FKM seals, ULTRA-FLO valve, and rated operating temperature -15Â°C to +200Â°C, it is designed for durable operation and optimal flow (2400 l/min at Pe=6 bar, Îp=0.5 bar). Based on the provided specification, it can withstand 35 bar working pressure in heavy industry applications.

Does the Quick-connection socket DN10, with hose socket, stainless steel, series 27KA support media other than air at Pe=6 bar?

Quick-connection socket DN10, with hose socket, stainless steel, series 27KA supports media other than air at Pe = 6 bar? Yes. The product data indicates a rated working pressure of 35 bar and specifies the flow rate (2400 l/min) measured for air at Pe = 6 bar with Îp = 0.5 bar, but the construction and materials support other media as well. Components are AISI 316Ti/AISI 316 stainless steel with FKM seals and an operating temperature range of â15Â°C to +200Â°C depending on the medium. These features (high working pressure, corrosion-resistant stainless steel, FKM sealing and wide temperature tolerance) make the Quick-connection socket DN10, with hose socket, stainless steel, series 27KA suitable for many fluids and gases besides air, provided the medium is compatible with FKM and the temperature/chemical compatibility of AISI 316/316Ti. For aggressive chemicals, fuels, or media outside the temperature or chemical compatibility limits, verify compatibility with the manufacturer or material-chemical compatibility charts before use.

Socket quick coupling DN10, with fitting for hose, steel stainless, series 27KA

All products, General-purpose low-pressure quick couplings/

Additional information

Material	SS – stainless steel

Single shut-off quick-coupling socket, series 27 DN 10, with a hose fitting, fitted with an ULTRA-FLO valve, providing optimal flow relative to the body size. Guaranteed operation at low and high temperatures. Thanks to its durable and exceptionally strong construction, it is used in heavy industry. Working pressure: 35 bar. Flow rate: 2400 l/min, Pe=6 bar, Δp=0.5 bar, air. Material: AISI 316Ti steel (fitting, socket body, sleeve, valve, spring and ring), AISI 316 steel (locking balls). Sealing: FKM. Operating temperature: from -15°C to +200°C, depending on the medium.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
RE-27KATF16EVX	Quick coupling socket type 27 DN 10 with fitting for 16 mm hose, AISI 316Ti, Viton	16	35	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Single shut-off quick-coupling socket, series 27 DN 10, with a hose fitting, fitted with an ULTRA-FLO valve, providing optimal flow relative to the body size. Guaranteed operation at low and high temperatures. Thanks to its durable and exceptionally strong construction, it is used in heavy industry. Working pressure: 35 bar. Flow rate: 2400 l/min, Pe=6 bar, Δp=0.5 bar, air. Material: AISI 316Ti steel (fitting, socket body, sleeve, valve, spring and ring), AISI 316 steel (locking balls). Sealing: FKM. Operating temperature: from -15°C to +200°C, depending on the medium.