Can the NiTO SC hot water quick connector socket with hose end, brass be safely disconnected frequently at temperatures above +60Â°C without reducing service life?

Yes. The NiTO SC hot water quick connector socket with hose end, brass can be safely disconnected frequently at temperatures above +60Â°C without reducing service life, provided normal use conditions are met. Key reasons: - Design and materials: The socket is chromeâplated brass, engineered for durability and frequent manual operation. - Temperature rating: The stated operating temperature is up to +150Â°C, so continuous or repeated exposure in the +60Â°C range is well within specification. - Sealing: Viton seals are specified; Viton is suitable for hot water and maintains elastomeric properties at temperatures above +60Â°C. - Pressure capability: Working pressure up to 25 bar supports typical hotâwater system demands; frequent disconnects under rated pressure are accounted for in the product design. - Intended use: The product description explicitly calls out use in installation areas where it is used directly by the operator and frequently disconnected for hot water above +60Â°C. Recommendations: ensure correct installation, avoid exceeding the 25 bar/150Â°C limits, and inspect seals periodically for wear according to normal maintenance intervals to maximize service life.

Is the NiTO SC hot water quick connector socket with hose end, brass safe to operate and disconnect repeatedly at temperatures up to +150Â°C?

Yes. The NiTO SC hot water quick connector socket with hose end, brass is designed for repeated operation and disconnection by the operator in hot-water installations. Its chrome-plated brass body, Viton sealing and specified operating temperature up to +150Â°C, together with a working pressure rating up to 25 bar and disconnection protection, indicate it is safe to operate and disconnect repeatedly at temperatures up to +150Â°C when used within those stated limits. Ensure installations respect the specified pressure, temperature and media compatibility and follow manufacturer instructions for safe use.

Does NiTO SC hot water quick connector socket with hose end, brass require special precautions when disconnecting above +60Â°C?

Yes. The NiTO SC hot water quick connector socket with hose end, brass requires special precautions when disconnecting above +60Â°C. Key precautions: - Heat risk: At temperatures above +60Â°C the connector and fluid can cause burns. Always allow components to cool if possible and use heat-resistant gloves and eye protection when disconnecting. - Pressure release: Even at high temperature, system pressure can be up to 25 bar. Before disconnecting, depressurize the line according to safe work procedures to avoid sudden spray of hot water. - Disconnection protection: The NiTO SC quick coupling socket includes disconnection protectionâensure the mechanism is fully engaged/disengaged per manufacturer instructions to prevent accidental opening under pressure or temperature. - Seals and compatibility: The Viton sealing is suitable for temperatures up to +150Â°C, but inspect seals regularly for wear or damage, especially when frequently disconnected at high temperatures, and replace as needed. - Material considerations: Chrome-plated brass handles high temperatures but can still become very hot; avoid bare-skin contact and consider insulating covers or tools for frequent operations. - Operator training: Only trained personnel should perform disconnection of hot-water connections; follow local safety rules and lockout/tagout where applicable. In short: use personal protective equipment, depressurize before disconnecting, respect the built-in disconnection protection, inspect seals regularly, and ensure trained operators handle disconnects above +60Â°C.

NiTO SC hot water quick connector socket with hose end, brass

All products, Quick couplings for water/

Additional information

Material	B – brass (bronze)

NiTO SC quick coupling socket, with disconnection protection, with hose end. For use with hot water (above +60°C) in installation areas where it is used directly by the operator and frequently disconnected. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +150°C. Sealing: viton.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
NT-6150SA8	SAFETY quick coupling socket with a 3/4" hose end, chrome-plated brass	20	25	In stock	0 zł		Enquiry
NT-6151SA8	SAFETY quick coupling socket with 1/2" hose end, chrome-plated brass	12	25	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

NiTO SC quick coupling socket, with disconnection protection, with hose end. For use with hot water (above +60°C) in installation areas where it is used directly by the operator and frequently disconnected. Material: chrome-plated brass. Working pressure: up to 25 bar. Operating temperature: up to +150°C. Sealing: viton.