Is the NiTO 1" water quick connector socket with GW, brass suitable for use with gasoline or oil-based fluids?

No . the NiTO 1" water quick connector socket with GW, brass is not suitable for gasoline or oil-based fluids. Although made of chrome-plated brass and rated for up to 25 bar and +80Â°C, its sealing material is NBR (nitrile rubber), which the description explicitly notes is not compatible with gasoline and oils. Using it with such fluids can cause seal degradation, leaks, and potential safety hazards. For gasoline or oil applications, choose a connector with seals specifically rated for hydrocarbon resistance (e.g., FKM/Viton or other fuel-resistant materials).

Can NiTO 1" water quick connector socket with GW, brass be used at temperatures above +80Â°C?

No. The NiTO 1" water quick connector socket with GW, brass is specified for an operating temperature up to +80Â°C. Using it above +80Â°C exceeds the manufacturer's stated limit and may compromise the chromeâplated brass components, NBR sealing (which degrades at higher temperatures), and overall pressure integrity (up to 25 bar rating applies within specified temperature). For safe, reliable operation choose a connector rated for higher temperatures or consult the manufacturer for approved alternatives.

Can NiTO 1" water quick connector socket with GW, brass be safely used for potable (drinking) water systems?

Probably yes, but with caveats. check certifications and suitability for potable water before installation. Explanation: - Material: The NiTO 1" water quick connector socket with GW, brass is chrome-plated brass. Brass is commonly used in potable water fittings, but lead content and specific alloy matter. Older or non-compliant brass alloys can leach lead. - Seals: It uses NBR (nitrile) seals. NBR is generally acceptable for potable water at typical temperatures, but some standards prefer EPDM or other elastomers for long-term drinking-water use because of chemical resistance and aging. - Pressure/temperature: Working pressure up to 25 bar and temperature up to +80Â°C are adequate for domestic hot and cold water systems. - What you must verify before use: 1. Drinking-water approval: Confirm the product is certified for potable water in your country (e.g., NSF/ANSI 61, WRAS, KIWA, ACS or relevant national certification). Certification ensures low lead content and safe materials. 2. Alloy specification: Ask the supplier for the brass alloy composition and maximum lead content (e.g., lead-free or â¤0.25% Pb depending on local rules). 3. Seal compatibility: Ensure NBR is acceptable for your installation (hot water, disinfectants, or specific chemicals might require EPDM or other compounds). 4. Installation and maintenance guidance from manufacturer. - If certifications or material declarations are unavailable, do not use it for potable water; use fittings explicitly rated and certified for drinking-water systems. Conclusion: The NiTO 1" water quick connector socket with GW, brass could be suitable technically, but only use it in potable (drinking) water systems after confirming required potable-water certifications and alloy/seal compliance for your jurisdiction.

Socket water quick coupling NiTO 1″ with female thread, brass

All products, Quick couplings for water/

Additional information

Material	B – brass (bronze)

A high-quality NiTO water quick coupling socket 1″ with a thread internal. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
NT-73500A3	Quick coupling socket 1" with 1" BSP female, brass chrome-plated	-	25	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A high-quality NiTO water quick coupling socket 1″ with a thread internal. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils).