Is the NiTO 3/4" water quick connector socket with hose end, brass suitable for use with gasoline or oil-based fluids?

No. The NiTO 3/4" water quick connector socket with hose end, brass is not suitable for gasoline or oil-based fluids. The sealing material is NBR (nitrile rubber), and the product description explicitly states it is "not suitable for gasoline and oils." It is designed for water applications, with chrome-plated brass construction, working pressure up to 25 bar and operating temperature up to +80Â°C.

Can the NiTO 3/4" water quick connector socket with hose end, brass be used with hot water near its +80Â°C limit?

Yes, the NiTO 3/4" water quick connector socket with hose end, brass can be used with hot water up to its specified limit of +80Â°C. However, for safe and reliable operation near that upper limit consider: - Short exposure at or near +80Â°C is acceptable; continuous long-term use at the maximum may accelerate wear of the NBR seals and reduce service life. - NBR sealing is temperature-sensitive and may harden or lose elasticity faster with prolonged high-temperature exposure; this can cause leaks. - Operating pressure (up to 25 bar) must still be respected at elevated temperatures; pressure ratings can effectively decrease at high temp-avoid using both maximum temperature and maximum pressure together. - If you expect frequent use above ~60â70Â°C or long-term hot applications, consider a connector with high-temperature-rated seals (e.g., FKM/Viton) or a product specified for higher temps. In summary: acceptable near +80Â°C for limited/occasional use, but avoid continuous operation at that temperature to prevent premature seal failure.

Does the NiTO 3/4" water quick connector socket with hose end, brass resist corrosion in hard water conditions?

Yes. the NiTO 3/4" water quick connector socket with hose end, brass is well suited to resist corrosion in typical hard water conditions. Reasoning based on the provided specs: - Material: chrome-plated brass. Brass is widely used for plumbing fittings because it has good natural corrosion resistance to water, including mineral-rich (hard) water. The chrome plating adds an additional protective layer that helps resist tarnishing, scaling and surface corrosion, improving durability in mineralized water. - Sealing: NBR. The NBR (nitrile rubber) seal is compatible with potable water and typical household water chemistry; it resists swelling or rapid breakdown from minerals present in hard water (note: NBR is not suitable for gasoline and oils, but that does not affect normal water use). - Working conditions: up to 25 bar and up to +80Â°C. These ratings indicate the component is built for robust service; normal hard water use at typical pressures and temperatures falls well within safe limits. Caveats: - Over long periods, heavy mineral scaling (lime/iron deposits) can form on any metal fitting in very hard water and may require periodic descaling or cleaning. Chrome plating delays surface degradation but does not make the part completely immune to scale buildup. - If water is highly aggressive (extremely high chloride or acidic conditions) or if chemical cleaners are used, corrosion behavior can differ; in such cases, consult water chemistry and consider additional protective measures. Overall, for standard household and garden applications with hard water, the NiTO 3/4" water quick connector socket with hose end, brass should provide reliable, corrosion-resistant performance.

Socket water quick coupling NiTO 3/4″ with fitting for hose, brass

All products, Quick couplings for water/

Additional information

Material	B – brass (bronze)

A high-quality NiTO water quick coupling socket 3/4″ with fitting for hose. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
NT-6350SA3	Quick coupling socket 3/4" with fitting for hose 3/4", brass chrome-plated	20	25	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A high-quality NiTO water quick coupling socket 3/4″ with fitting for hose. Material: brass chrome-plated. Working pressure: up to 25 bar. Operating temperature: up to +80°C. Sealing: NBR (not suitable for gasolines and oils).