Is the RB35 water gun with 1/2" BSP rotating connection, polyamide, suitable for continuous use at 12 bar and +80Â°C in food industry environments?

Short answer: Yes, the RB35 water gun with 1/2" BSP rotating connection, polyamide is suitable for continuous use at up to 12 bar and +80Â°C in foodâindustry environments, provided installation and operating conditions respect the stated limits. Why: The product description specifies materials and limits relevant to foodâindustry continuous use: - Body: polyamide reinforced with fiberglass . a common, durable plastic for foodâgrade equipment (resistant to mechanical stress at elevated temperature). - Wet parts: valve piston stainless steel and EPDM sealing . stainless steel and EPDM are widely used and compatible with many food environments and hot water up to +80Â°C. - Protective rubber rings and trigger guard reduce risk of damage and accidental discharge. - Maximum working pressure is 12 bar and maximum operating temperature +80Â°C . your stated conditions match these maxima. - Flow characteristics (30 l/min at 5 bar, up to 50 l/min) indicate robust performance. Notes/precautions: - Confirm that the specific polyamide, stainless steel grade and EPDM formulation meet your facilityâs foodâcontact approvals (e.g., FDA, EU 10/2011) if regulatory compliance is required. - Continuous use at maximum temperature/pressure can accelerate wear; verify maintenance schedules and inspect seals periodically. - Ensure upstream water quality and any detergents/chemicals used are compatible with EPDM and the stainless steel grade to avoid premature degradation.

Can the RB35 water gun with 1/2" BSP rotating connection, polyamide, be safely used with stainless-steel valves and EPDM seals in food processing lines?

Yes - the RB35 water gun with 1/2" BSP rotating connection, polyamide Format appears suitable for use in food processing lines when paired with stainless-steel valves and EPDM seals. The gun body is polyamide (with fiberglass), the valve piston is stainless steel and seals are EPDM - all materials commonly accepted for food-contact applications. Operational limits (max 12 bar, max +80Â°C) and smooth flow control align with typical processing conditions; flow rates (30 l/min at 5 bar, up to 50 l/min) are within normal cleaning/spray uses. Ensure the specific stainless-steel grade (preferably AISI 316 for corrosion resistance) and food-grade EPDM certification, verify compatibility with your product/cleaning chemicals, and confirm cleaning/sanitation procedures and regulatory compliance for your jurisdiction.

Does the RB35 water gun with 1/2" BSP rotating connection, polyamide, meet FDA or EU food-contact material standards?

Based on the provided description of the RB35 water gun with 1/2" BSP rotating connection, polyamide, there is no explicit statement that the materials or the finished product comply with FDA or EU food-contact material regulations. The description lists materials (polyamide with fiberglass, stainless steel valve piston, EPDM sealing, soft rubber protective rings) and operating parameters (max. 12 bar, max. +80Â°C, flow rates), but it does not cite specific certifications, declarations of compliance, or applicable standards (e.g., EU Regulation (EU) No 10/2011 for plastics, Regulation (EC) No 1935/2004, or FDA 21 CFR parts relevant to food-contact materials). Conclusion: Without a manufacturerâs declaration or test/certification documentation, you cannot assume RB35 water gun with 1/2" BSP rotating connection, polyamide meets FDA or EU food-contact material standards. To confirm compliance, request from the supplier explicit declarations of conformity, test reports, or certificates referencing the relevant FDA regulations or EU food-contact legislation.

Water gun RB35 with female thread 1/2″ BSP swivel, polyamide

All products, Low-pressure water spray guns/

Additional information

Light, plastic Water gun for industry food. made with plastic (polyamide with fiber glass), piston valve – steel stainless, sealing – EPDM. equipped in rings protective with soft rubber. has smooth adjustment flow. Bow cover trigger protects against uncontrolled opening stream water and against damage. maximum Working pressure: 12 bar. Maximum Operating temperature: +80°C. Flow rate: 30 l/min (5 bar), max. 50 l/min.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
PR-RB35-SS	Gun for wody RB35, Coupling swivel 1/2" female, poliamid/glass fibre/AISI 303	-	12	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Light, plastic Water gun for industry food. made with plastic (polyamide with fiber glass), piston valve – steel stainless, sealing – EPDM. equipped in rings protective with soft rubber. has smooth adjustment flow. Bow cover trigger protects against uncontrolled opening stream water and against damage. maximum Working pressure: 12 bar. Maximum Operating temperature: +80°C. Flow rate: 30 l/min (5 bar), max. 50 l/min.