Is the Rotary joint with GZ BSP/GZ BSP, brass, type AK suitable for wash guns at hose connections up to 30 bar with EPDM sealing?

Yes. The Rotary joint with GZ BSP/GZ BSP, brass, type AK is suitable for wash guns at hose connections up to 30 bar with EPDM sealing. The product description explicitly states it is intended for installation in industrial guns.particularly wash guns.at the hose connection point where rotation is required, its material is brass, the working pressure is up to 30 bar, and the sealing is EPDM, matching the specified application and requirements.

Can Rotary joint with GZ BSP/GZ BSP, brass, type AK operate reliably at hose connections of wash guns under 30 bar with EPDM seals?

Yes. Rotary joint with GZ BSP/GZ BSP, brass, type AK can operate reliably at hose connections of wash guns under 30 bar with EPDM seals, provided installation and operating conditions are met: the device is rated for working pressure up to 30 bar, brass construction is suitable for typical wash-gun environments, and EPDM seals are compatible with water and common detergents used in wash applications. Ensure proper torque on BSP thread connections, correct alignment to avoid side loads, routine inspection for wear, and avoid exposure to aggressive chemicals or temperatures beyond EPDM limits (typically up to ~120Â°C, lower under pressure). Under these conditions the rotary joint should perform reliably.

Can Rotary joint with GZ BSP/GZ BSP, brass, type AK withstand continuous rotation at hose connections in wash guns up to 30 bar?

Yes. The Rotary joint with GZ BSP/GZ BSP, brass, type AK is designed specifically for installation at hose connection points in industrial wash guns where continuous rotation is required. Constructed from brass, with EPDM sealing and rated for working pressures up to 30 bar, it is suitable for the operating conditions described. Key supporting points: - Intended application: explicitly meant for wash guns and hose connection points requiring rotation. - Pressure rating: rated up to 30 bar, matching your specified operating pressure. - Materials and sealing: brass body offers good mechanical strength and corrosion resistance for typical wash-gun environments; EPDM sealing provides reliable sealing performance for water and many common cleaning fluids used in such applications. - Continuous rotation: the product description identifies rotation as a design requirement, so the joint is suited for continuous rotational movement at the connection. Notes and cautions: - Ensure compatibility of EPDM with any chemicals or solvents used in your process (EPDM is excellent for water, steam, and many alkalis, but not for many hydrocarbons and some solvents). - Verify installation torque and alignment to avoid undue wear; periodic inspection is recommended in heavy-duty or abrasive environments. - For atypical temperatures, aggressive chemicals, or pressures surpassing 30 bar, consult the manufacturer for suitability or alternative materials/seals.

Rotary joint with GZ BSP/GZ BSP, brass, type AK

All products, Low-pressure water spray guns/

Additional information

Material	B – brass (bronze)
Standard length [m]	50

Rotary joint AK with external BSP threads intended for installation in industrial guns, particularly in wash guns at the hose connection point, where rotation is required due to the operation of the gun. Material: brass. Working pressure: up to 30 bar. Sealing: EPDM.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AK-SWM-09-M-08	Rotary joint DN9, G 1/2"/G 1/2" BSP (30° cone), brass	-	30	In stock	0 zł		Enquiry
AK-SWM-09-M-08-12	Rotary joint DN9, G1/2"/G3/4" BSP (30° cone), brass	-	30	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Rotary joint AK with external BSP threads intended for installation in industrial guns, particularly in wash guns at the hose connection point, where rotation is required due to the operation of the gun. Material: brass. Working pressure: up to 30 bar. Sealing: EPDM.