Can the Rotary nozzle for sewer unclogging without centric hole, type RM with GW 1/4" BSP and 19 mm diameter handle pressures up to 150 bar safely?

Yes. The Rotary nozzle for sewer unclogging without centric hole, type RM with GW 1/4" BSP connection and 19 mm diameter is rated for a working pressure up to 150 bar. Constructed with a stainless steel body and a brass rotor, it is designed to withstand that pressure in normal operating conditions. Ensure proper installation, use compatible hoses and fittings rated for â¥150 bar, and perform routine inspections for wear or damage. Follow manufacturer guidelines for safe operation, correct rotational speed, and pressure limits to avoid overpressurization or component failure.

Does the Rotary nozzle for sewer unclogging without centric hole, type RM require specific hoses or fittings for GW 1/4" BSP connection?

Rotary nozzle for sewer unclogging without centric hole, type RM with connection GW 1/4" BSP uses a standard 1/4" BSP (G) female thread. It does not inherently require proprietary hoses or fittings-any high-pressure hose or adapter with a matching 1/4" BSP male thread and rated for up to 150 bar is suitable. Ensure the hose material and fittings are rated for pressure, compatible with stainless steel/brass contact, and meet local safety standards. If your hose has a different thread type, use a correct adapter to 1/4" BSP; avoid mismatched or improvised connections.

Is the Rotary nozzle for sewer unclogging without centric hole, type RM compatible with hot water or chemical cleaning agents?

Rotary nozzle for sewer unclogging without centric hole, type RM Format is made with a stainless steel body and a brass rotor, and is rated for working pressure up to 150 bar. Based on these materials and typical construction: - Hot water: Stainless steel body tolerates high temperatures well; brass rotor also resists heat but can soften or wear faster at very high temperatures. Short-term use with hot water (typical drain-cleaning temperatures up to ~80â90 Â°C) is generally acceptable, but continuous exposure to near-boiling water may reduce lifespan of internal parts and seals. Check manufacturer temperature limits if available. - Chemical cleaning agents: Compatibility depends on the specific chemical. Stainless steel and brass resist many common detergents and mild acids/bases, but strong oxidizers (bleach/chlorine compounds), concentrated acids, strong alkalis, or solvents can corrode brass or attack seals and bearings. Use of aggressive chemicals can void warranties and damage the rotor, seals, and threads. Recommendations: - Avoid prolonged exposure to very high temperatures and aggressive chemicals. - Rinse thoroughly with water after any chemical use. - When in doubt, consult the manufacturer or use compatible chemicals known safe for stainless steel and brass, or use mechanical cleaning without chemicals. Conclusion: Rotary nozzle for sewer unclogging without centric hole, type RM Format can handle hot water and many mild cleaning agents, but avoid strong oxidizers, concentrated acids/alkalis, and prolonged high-temperature exposure to prevent damage.

Rotary nozzle for sewer unclogging without centric hole, type RM

Additional information

Standard length [m]	10, 2, 30

Rotary nozzle RM for unblocking sewage without a central hole. Connection: GW 1/4″ BSP. Material: stainless steel (body), brass (rotor). Working pressure: up to 150 bar. Diameter: 19 mm.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RM-200049794	Rotary nozzle for channels, without opening, 150 bar, 1/4" BSP female thread, caliber 040	-	300	In stock	Enquiry
RM-200049795	Rotary nozzle for channels without opening, 150 bar, 1/4" BSP female thread, calibration 045	-	300	In stock	Enquiry
RM-200049800	Rotary nozzle for channels, without opening, 150 bar, GW 1/4" BSP, caliber 050	-	150	In stock	Enquiry
RM-200049810	Rotary nozzle for channels, without opening, 150 bar, GW 1/4" BSP, caliber 060	-	150	In stock	Enquiry
RM-200049820	Rotary nozzle for channels, without opening, 150 bar, GW 1/4" BSP, calibration 080	-	150	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Rotary nozzle RM for unblocking sewage without a central hole. Connection: GW 1/4″ BSP. Material: stainless steel (body), brass (rotor). Working pressure: up to 150 bar. Diameter: 19 mm.