Can Rubber bellows for expansion joint 115 NBR be used with vegetable and animal fats at temperatures up to +90Â°C?

Yes. Rubber bellows for expansion joint 115 NBR Format can be used with vegetable and animal fats at temperatures up to +90Â°C. The product description explicitly states suitability for media including vegetable and animal fats and gives an operating temperature range up to +90Â°C (depending on the medium). Inner layer NBR (nitrile) is compatible with oils and fats, reinforcement is nylon cord, outer layer is CR, and the overall design is intended for installations handling such media. Ensure application-specific validation (pressure, concentration, and exposure duration) but from the given specification the material is appropriate for vegetable and animal fats at temperatures up to +90Â°C.

Are Rubber bellows for expansion joint 115 NBR compatible with aerosol oils and anti-corrosive water additives at -30Â°C to +90Â°C?

Yes. Rubber bellows for expansion joint 115 NBR Format are compatible with aerosol oils and water with added antiâcorrosive substances within the specified temperature range. The inner layer is NBR (suitable for mineral oils, vegetable/animal fats and aerosol oils), reinforcement is nylon cord, outer layer is CR, and the declared operating temperature range is â30Â°C to +90Â°C (depending on the medium), covering the stated conditions.

Is Rubber bellows for expansion joint 115 NBR suitable for use with mineral oils in high-temperature applications?

Rubber bellows for expansion joint 115 NBR Format made with an inner layer of NBR (nitrile rubber), nylon reinforcement and an outer CR (chloroprene) layer are described as suitable for installations where the medium includes mineral oils, vegetable and animal fats, aerosol oils and water with anti-corrosive additives. The stated operating temperature range is â30Â°C to +90Â°C (depending on the medium). Conclusion: Yes. Rubber bellows for expansion joint 115 NBR Format is suitable for use with mineral oils in high-temperature applications up to the specified maximum of +90Â°C. Do note that âhigh-temperatureâ here is limited to +90Â°C per the product specification; for mineral oils at temperatures above +90Â°C, compatibility and performance cannot be guaranteed and an alternative material with a higher temperature rating should be considered. Also verify compatibility with the specific oil type and any additives, and confirm application-specific factors (pressure, dynamic movement, exposure time) with the manufacturer.

Bellows rubber for compensator 115 NBR

All products, Rubber compensators/

Additional information

Material	NBR – nitrile rubber
Maximum operating temperature [°C]	90
Minimum operating temperature [°C]	-30
Vacuum resistance	yes

A rubber bellows for a compensator, intended for work in installations in which the medium consists of mineral oils, vegetable and animal fats, oils in aerosol, water with the addition of anti-corrosion substances. Inner layer: rubber NBR. Reinforcement: nylon cord. Outer layer: rubber CR. Operating temperature: from -30°C to +90°C (depending on medium).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TG-115NM-032	Bellows rubber type 115 NBR, DN32, L=130 mm	32	16	In stock	Enquiry
TG-115NM-040	Bellows rubber type 115 NBR, DN40, L=130 mm	40	16	In stock	Enquiry
TG-115NM-050	Bellows rubber type 115 NBR, DN50, L=130 mm	50	16	In stock	Enquiry
TG-115NM-065	Bellows rubber type 115 NBR, DN65, L=130 mm	65	16	In stock	Enquiry
TG-115NM-080	Bellows rubber type 115 NBR, DN80, L=130 mm	80	16	In stock	Enquiry
TG-115NM-100	Bellows rubber type 115 NBR, DN100, L=130 mm	100	16	In stock	Enquiry
TG-115NM-125	Bellows rubber type 115 NBR, DN125, L=130 mm	125	16	In stock	Enquiry
TG-115NM-150	Bellows rubber type 115 NBR, DN150, L=130 mm	150	16	In stock	Enquiry
TG-115NM-200	Bellows rubber type 115 NBR, DN200, L=130 mm	200	16	In stock	Enquiry
TG-115NM-250	Bellows rubber type 115 NBR, DN250, L=130 mm	250	16	In stock	Enquiry
TG-115NM-300	Bellows rubber type 115 NBR, DN300, L=130 mm	300	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A rubber bellows for a compensator, intended for work in installations in which the medium consists of mineral oils, vegetable and animal fats, oils in aerosol, water with the addition of anti-corrosion substances. Inner layer: rubber NBR. Reinforcement: nylon cord. Outer layer: rubber CR. Operating temperature: from -30°C to +90°C (depending on medium).