Is the Rubber cover (handle) for hose end, EPDM, type PRH available in different colors and how do I choose the right one?

Yes . the Rubber cover (handle) for hose end, EPDM, type PRH is available in four colors: blue, red, yellow and green. Choose the right color based on function, safety and organization needs: - Color-coding: assign colors to different hose types, media or zones (e.g., blue = water, red = hot/chemical lines, yellow = gas/air, green = return/neutral) to speed identification and reduce errors. - Visibility: pick brighter colors (yellow, red, green) for high-visibility or outdoor use; blue is more discreet. - Safety/compliance: follow any site or industry color standards if they exist. - Maintenance/logistics: use consistent color rules across equipment to simplify inventory and replacement. Material and function: made of EPDM, the Rubber cover (handle) for hose end, EPDM, type PRH protects the hose end from excessive bending and eases handling, so color choice does not affect performance.

Does the Rubber cover (handle) for hose end, EPDM, type PRH improve hose durability and prevent kinking?

Yes. The Rubber cover (handle) for hose end, EPDM, type PRH helps improve hose durability and reduces kinking. Made of flexible, durable EPDM, it protects the hose end from excessive bending-a common cause of wear, stress and premature failure-and eases handling, which minimizes sharp bends during use. While it cannot eliminate all risks (proper storage, avoiding over-tension and using appropriate hose diameter remain important), fitting this handle significantly lowers localized stress at the termination point and helps extend service life.

Can Rubber cover (handle) for hose end, EPDM, type PRH be used with different hose diameters and fittings?

Rubber cover (handle) for hose end, EPDM, type PRH is designed to protect the hose end from excessive bending and to facilitate handling during cleaning and washing. Because the product description specifies material (EPDM), function, and available colors but does not list specific sizes or an adjustable feature, you should assume the following: - Compatibility depends on the internal diameter and shape of the Rubber cover (handle) for hose end, EPDM, type PRH. If the cover is a snug molded fit, it will only fit hoses and fittings that match its designed diameter and profile. - EPDM is flexible and allows some tolerance, so small variations in hose diameter or slightly different fitting profiles may still work. However, large differences in diameter, non-cylindrical fittings, or fixtures with locking collars or threads may prevent proper fit or reduce protective function. - For reliable performance (secure fit and effective bending protection), verify the specific size(s) or part numbers offered for Rubber cover (handle) for hose end, EPDM, type PRH and match them to your hose outer diameter and fitting geometry. If multiple sizes are not provided, contact the supplier/manufacturer for compatibility guidance or request a sample/check dimensions before assuming interchangeability. In short: minor diameter variations may be accommodated thanks to EPDM flexibility, but the cover is not universally compatible with all hose diameters and fittingsâconfirm size/specifications to ensure proper fit.

Rubber cover (handle) for hose end, EPDM, type PRH

All products, Low-pressure water spray guns/

Additional information

Standard length [m]	50

Hose guard (handle) for cleaning and washing hoses protects the hose end from excessive bending and facilitates hose operation. Available in colors: blue, red, yellow, green. Material: EPDM.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AK-PRH-20,5-BL	Hose cover, L=146 mm, inner diameter 20.5 mm, EPDM, blue	-	-	In stock	Enquiry
AK-PRH-20,5-R	Hose cover, L=146 mm, inner diameter 20.5 mm, EPDM, red	-	-	In stock	Enquiry
AK-PRH-21-BL	Hose cover, L=175 mm, inner diameter 21 mm, EPDM, blue	-	-	In stock	Enquiry
AK-PRH-21-R	Hose cover, L=175 mm, inner diameter 21 mm, EPDM, red	-	-	In stock	Enquiry
AK-PRH-22,5-BL	Hose cover, L=148 mm, inner diameter 22.5 mm, EPDM, blue	-	-	In stock	Enquiry
AK-PRH-23-BL	Hose cover, L=175 mm, inner diameter 23 mm, EPDM, blue	-	-	In stock	Enquiry
AK-PRH-23-G	Hose cover, L=175 mm, inner diameter 23 mm, EPDM, green	-	-	In stock	Enquiry
AK-PRH-23-R	Hose cover, L=175 mm, inner diameter 23 mm, EPDM, red	-	-	In stock	Enquiry
AK-PRH-23-Y	Hose cover, L=175 mm, inner diameter 23 mm, EPDM, yellow	-	-	In stock	Enquiry
AK-PRH-31-BL	Hose cover, L=175 mm, inner diameter 31 mm, EPDM, blue	-	-	In stock	Enquiry
AK-PRH-31-G	Hose cover, L=175 mm, inner diameter 31 mm, EPDM, green	-	-	In stock	Enquiry
AK-PRH-31-R	Hose cover, L=175 mm, inner diameter 31 mm, EPDM, red	-	-	In stock	Enquiry
AK-PRH-31-Y	Hose cover, L=175 mm, inner diameter 31 mm, EPDM, yellow	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hose guard (handle) for cleaning and washing hoses protects the hose end from excessive bending and facilitates hose operation. Available in colors: blue, red, yellow, green. Material: EPDM.