Is the Rubber nozzle, series 208, safe for use on sensitive materials like painted surfaces and plastics at the specified 16 bar working pressure?

Yes. The Rubber nozzle, series 208 is designed specifically for delicate surfaces and is suitable for use on sensitive materials such as painted surfaces and plastics at the specified working pressure of 16 bar. Its rubber construction provides a soft, non-marring contact that reduces risk of scratching, chipping or surface damage compared with hard metal nozzles. The product is intended for direct installation on the tube and is available in Ã14 mm, Ã25 mm and Ã34 mm diameters, allowing selection of an appropriate size for the application and airflow needs. Caveats: always verify compatibility with the particular paint or plastic (soft or aged coatings can be more vulnerable), maintain proper distance and angle during use, and test on an inconspicuous area when possible. Ensure the nozzle is in good condition (no cuts or hardening of the rubber) and that system pressure is correctly regulated to 16 bar or below.

Can Rubber nozzle, series 208, be safely mounted directly on tubing without risking damage to fragile surfaces at 16 bar?

Yes. Rubber nozzle, series 208 is designed for use on delicate surfaces and supports direct installation on tubing. With a working pressure of 16 bar and available diameters Ã14 mm, Ã25 mm, and Ã34 mm, it is suitable for mounting directly on the tube without risking damage to fragile surfaces when used as specified. Ensure correct diameter fit and proper installation to maintain sealing and prevent leaks.

Does Rubber nozzle, series 208, protect fragile surfaces when used at 16 bar with Ã14/Ã25/Ã34 diameters?

Yes. Rubber nozzle, series 208, is designed specifically for use on delicate surfaces andâwhen installed directly on the tubeâprovides protective contact even at the stated working pressure of 16 bar. The available diameters (Ã14, Ã25, Ã34 mm) change the contact area and airflow pattern: larger diameters distribute the impact over a wider area and generally reduce point pressure, which can be gentler on fragile surfaces; smaller diameters concentrate the flow and may exert higher local forces. For best protection, choose the largest diameter compatible with your application (Ã34), ensure correct installation on the tube, and validate with a trial on a representative surface.

Nozzle rubber, series 208

Air guns, All products/

Additional information

Nozzle rubber for guns CEJN for Applications na delicate surfaces; direct installations na tube. Available diameter: Ø 14 mm, Ø 25 mm and Ø 34 mm. pressure working: 16 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
CJ-112089956	Nozzle rubber CEJN, fi 14 mm, for tube	-	16	In stock	Enquiry
CJ-112089957	Nozzle rubber CEJN, fi 25 mm, for tube	-	16	In stock	Enquiry
CJ-112089958	Nozzle rubber CEJN, fi 34 mm, for tube	-	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Nozzle rubber for guns CEJN for Applications na delicate surfaces; direct installations na tube. Available diameter: Ø 14 mm, Ø 25 mm and Ø 34 mm. pressure working: 16 bar.