Is the Sandblasting gun with 0.7 l. plastic tank, 390 series suitable for use with mineral abrasive grain sizes 0.1â0.8 mm at operating pressures of 4â7 bar?

Yes. The Sandblasting gun with 0.7 l. plastic tank, 390 series is suitable for use with mineral abrasive grain sizes 0.1â0.8 mm at operating pressures of 4â7 bar. The product spec explicitly lists a grain diameter range of 0.1 Ã· 0.8 mm and an operating pressure range of 4 Ã· 7 bar (maximum pressure 8 bar), so the described abrasive size and pressure fall within the deviceâs intended parameters.

Can the Sandblasting gun with 0.7 l. plastic tank, 390 series be used safely at temperatures from 0Â°C to +50Â°C?

Yes. The Sandblasting gun with 0.7 l. plastic tank, 390 series is specified for an operating temperature range from 0Â°C to +50Â°C, so it can be used safely within that temperature range when operated at recommended pressures (4â7 bar, max 8 bar) and with appropriate abrasive (grain 0.1â0.8 mm).

Does the Sandblasting gun with 0.7 l. plastic tank, 390 series perform effectively on rust and solid contaminants in hard-to-reach areas?

Yes. The Sandblasting gun with 0.7 l. plastic tank, 390 series is designed specifically for rust and solid contaminant removal in hard-to-reach areas and, based on its specifications, will perform effectively when used correctly. Key reasons: - Abrasive compatibility: It accepts mineral abrasive grains from 0.1 to 0.8 mm, a suitable range for removing rust and stubborn deposits while allowing selection of the appropriate grit for the surface and degree of contamination. - Nozzle and pressure: The 4 mm nozzle combined with an operating pressure range of 4â7 bar (max 8 bar) provides strong, focused abrasive flow ideal for precision cleaning in tight spots. - Portability and access: The compact 0.7 l plastic tank makes the tool maneuverable for confined or awkward areas where larger units cannot reach. - Operating conditions: Rated for 0Â°C to +50Â°C, it will work across common workshop and field environments. Limitations to consider: - For very heavy, thick corrosion or large-scale stripping, coarser abrasives, higher flow rates, or a larger industrial blaster may be more efficient. - Plastic tank durability: Plastic is lightweight but less impact-resistant than metal tanks; handle with care when working in rugged conditions. - Proper abrasive selection and adequate pressure are crucial; too fine an abrasive or too low pressure reduces effectiveness, while overly coarse grit or excessive pressure may damage delicate substrates. Conclusion: For targeted rust and solid contaminant removal in confined or hard-to-reach areas, the Sandblasting gun with 0.7 l. plastic tank, 390 series is an effective, appropriately specified tool when paired with the correct abrasive and operated within its pressure/temperature limits.

Sandblasting gun with 0.7 l. plastic tank, 390 series

All products, Special air guns/

Additional information

Rust and solid contaminant removal gun for hard-to-reach areas using mineral abrasive material. Grain diameter 0.1 ÷ 0.8 mm depending on the material being blasted. Version with a plastic tank with a capacity of 0.7 l. Nozzle diameter: 4 mm. Maximum pressure: 8 bar. Operating pressure: 4 ÷ 7 bar. Operating temperature: from 0°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EW-39012	Sandblasting gun, 1 l tank, plastic, DN7.2 plug	-	8	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Rust and solid contaminant removal gun for hard-to-reach areas using mineral abrasive material. Grain diameter 0.1 ÷ 0.8 mm depending on the material being blasted. Version with a plastic tank with a capacity of 0.7 l. Nozzle diameter: 4 mm. Maximum pressure: 8 bar. Operating pressure: 4 ÷ 7 bar. Operating temperature: from 0°C to +50°C.