Can the SCAR polyamide spiral air hose with BSPT fittings handle continuous operation at 28 bar and -40Â°C to +80Â°C?

Yes . based on the provided specification, the SCAR polyamide spiral air hose with BSPT fittings is rated for continuous operation at up to 28 bar and across the temperature range â40Â°C to +80Â°C. The hose material is PA12 (nylon), the working pressure is given as up to 28 bar (subject to hose diameter), and the operating temperature is specified as â40Â°C to +80Â°C. Caveats to confirm in your application: - Verify the specific hose diameter/version you have, since maximum working pressure depends on diameter and may be lower than 28 bar for some sizes. - Ensure fittings and system components (BSPT threads, seals, connectors) are compatible with the temperature extremes and pressure for continuous use. - Consider dynamic factors (pressure spikes, repeated flexing, abrasion, chemical exposure) that can reduce service life; if present, apply appropriate safety margins or consult the manufacturer for duty-cycle ratings.

Is the SCAR polyamide spiral air hose compatible with standard pneumatic BSPT threaded fittings across all sizes?

Yes. The SCAR polyamide spiral air hose is finished on both ends with external BSPT threaded fittings, so it is compatible with standard pneumatic BSPT threaded fittings. Ensure you match the hoseâs BSPT thread size to your mating fitting and verify pressure and temperature ratings for your application (working pressure up to 28 bar depending on diameter; temperature range â40Â°C to +80Â°C).

Does the SCAR polyamide spiral air hose require lubrication for long-term use with BSPT fittings?

No. the SCAR polyamide spiral air hose does not require routine lubrication for long-term use with BSPT fittings. Polyamide (PA 12/nylon) is a low-friction, wearâresistant material compatible with compressed air service across the stated temperature range (â40Â°C to +80Â°C). When used within the specified working pressure (up to 28 bar) and with properly sealed external BSPT threaded fittings, lubrication of the hose material itself is unnecessary and can attract dirt or degrade some seal materials. Recommended practices instead: - Ensure BSPT fittings are correctly installed with appropriate thread sealant (PTFE tape or suitable liquid sealant) rated for pneumatic use. - Use compatible seal materials (e.g., nitrile, Viton) if replacing or specifying Oârings or gaskets. - Inspect fittings and hose ends periodically for wear, damage or leaks and replace as needed. - Avoid exposure to aggressive chemicals or oils that could affect PA 12 properties. If your application involves specialty fluids, extreme contamination, or specific manufacturer instructions, follow those guidelines.

SCAR polyamide spiral air hose

All products, Pneumatic hoses/

Additional information

Material	B – brass (bronze)
Maximum operating temperature [°C]	80
Minimum operating temperature [°C]	-40
Vacuum resistance	no

Hose – spiral nylon polyamide tube intended for all types of pneumatic devices, control systems, etc. Finished on both ends with a straight section of 100 mm in length and external BSPT threaded fittings. The stated total length is the maximum length of the hose when stretched. Hose material: blue polyamide PA 12 (nylon). Working pressure: up to 28 bar (depending on hose diameter). Operating temperature: from -40°C to +80°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
ZC-SCAR-06-025	Spiral hose PA12 SCAR 6x4 mm x 2.5 m with GZ 1/4"	4	28	In stock	Enquiry
ZC-SCAR-06-050	Spiral hose PA12 SCAR 6x4 mm, L=5 m with GZ 1/4"	4	28	In stock	Enquiry
ZC-SCAR-06-075	Spiral hose PA12 SCAR 6x4 mm, L=7.5 m with GZ 1/4"	4	28	In stock	Enquiry
ZC-SCAR-06-100	Spiral hose PA12 SCAR 6x4 mm, L=10 m with GZ 1/4"	4	28	In stock	Enquiry
ZC-SCAR-08-025	Spiral hose PA12 SCAR 8x6 mm, L=2.5 m with GZ 1/4"	6	20	In stock	Enquiry
ZC-SCAR-08-050	Spiral hose PA12 SCAR 8x6 mm, L=5 m with GZ 1/4"	6	20	In stock	Enquiry
ZC-SCAR-08-075	Spiral hose PA12 SCAR 8x6 mm, L=7.5 m with GZ 1/4"	6	20	In stock	Enquiry
ZC-SCAR-08-100	Spiral hose PA12 SCAR 8x6 mm, L=10 m with GZ 1/4"	6	20	In stock	Enquiry
ZC-SCAR-10-025	Spiral hose PA12 SCAR 10x8 mm, L=2.5 m with GZ 3/8"	8	16	In stock	Enquiry
ZC-SCAR-10-050	Spiral hose PA12 SCAR 10x8 mm, L=5 m with GZ 3/8"	8	16	In stock	Enquiry
ZC-SCAR-10-075	Spiral hose PA12 SCAR 10x8 mm, L=7.5 m with GZ 3/8"	8	16	In stock	Enquiry
ZC-SCAR-10-100	Spiral hose PA12 SCAR 10x8 mm, L=10 m with GZ 3/8"	8	16	In stock	Enquiry
ZC-SCAR-12-025	Spiral hose PA12 SCAR 12x10 mm, L=2.5 m with GZ 3/8"	10	12	In stock	Enquiry
ZC-SCAR-12-050	Spiral hose PA12 SCAR 12x10 mm, L=5 m with GZ 3/8"	10	12	In stock	Enquiry
ZC-SCAR-12-075	Spiral hose PA12 SCAR 12x10 mm, L=7.5 m with GZ 3/8"	10	12	In stock	Enquiry
ZC-SCAR-12-100	Spiral hose PA12 SCAR 12x10mm, L=10 m with GZ 3/8"	10	12	In stock	Enquiry
ZC-SCAR-15-025	Spiral hose PA12 SCAR 15x12 mm, L=2.5 m with GZ 1/2"	12	16	In stock	Enquiry
ZC-SCAR-15-050	Spiral hose PA12 SCAR 15x12 mm, L=5 m with GZ 1/2"	12	16	In stock	Enquiry
ZC-SCAR-15-075	Spiral hose PA12 SCAR 15x12 mm, L=7.5 m with GZ 1/2"	12	16	In stock	Enquiry
ZC-SCAR-15-100	Spiral hose PA12 SCAR 15x12mm, L=10 m with GZ 1/2"	12	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hose – spiral nylon polyamide tube intended for all types of pneumatic devices, control systems, etc. Finished on both ends with a straight section of 100 mm in length and external BSPT threaded fittings. The stated total length is the maximum length of the hose when stretched. Hose material: blue polyamide PA 12 (nylon). Working pressure: up to 28 bar (depending on hose diameter). Operating temperature: from -40°C to +80°C.