Does the Nozzle set for NiTO II gun include the required 3 mm hex key for installing the 20, 30, and 60 l/min brass nozzles?

Yes. The Nozzle set for NiTO II gun includes the required 3 mm hex key for installing the 20, 30, and 60 l/min brass nozzles.

Are replacement brass nozzles for the Nozzle set for NiTO II gun compatible with other NiTO II models?

Yes - the replacement brass nozzles from the Nozzle set for NiTO II gun Format are compatible with other NiTO II models that use the same standard NiTO II outlet/nozzle interface. The set includes 20, 30 and 60 l/min (5 bar) brass nozzles and a 3 mm hex key for installation; material is brass. Ensure your NiTO II model accepts interchangeable NiTO II nozzles before purchasing.

Can the Nozzle set for NiTO II gun's brass nozzles (20/30/60 l/min) be cleaned with standard solvents?

Yes. the Nozzle set for NiTO II gun (brass nozzles 20/30/60 l/min) can generally be cleaned with standard solvents, but observe these precautions: - Use mild, non-corrosive solvents compatible with brass (e.g., isopropyl alcohol, light degreasers, or warm soapy water). Avoid strong acidic or highly alkaline cleaners that can etch or dezincify brass. - Do not use aggressive chlorinated solvents (e.g., methylene chloride) or concentrated acids; they may damage the brass and affect nozzle tolerances. - Clean gently: soak briefly if needed, then remove deposits with a soft brush or non-metallic pick. Avoid hard metal tools that can deform the nozzle or damage the orifice. - After cleaning, rinse thoroughly with clean water or alcohol and dry completely to prevent corrosion or residue. - Reinstall using the provided 3 mm hex key, ensuring correct torque and alignment to preserve flow characteristics. If the nozzle has special coatings, manufacturer-specific instructions, or heavy encrustation, consult NiTO II gun documentation or the manufacturer for recommended cleaning agents and procedures.