Is the SPEEDFIT pipe plug, plastic rated for 10 bar at 23Â°C and safe to use up to 70Â°C in compressed air systems?

Yes . the SPEEDFIT pipe plug, plastic is rated for use in compressed air systems at 10 bar when the temperature is +23Â°C. It is specified for a working pressure of 10 bar at +23Â°C and 7 bar at +70Â°C, with an operating temperature range of -20Â°C to +70Â°C. Therefore it is safe to use at the 10 bar rating only at ambient temperature around +23Â°C; at elevated temperatures (toward +70Â°C) the allowable pressure reduces to 7 bar. Ensure system temperature and pressure do not exceed the corresponding rated limits.

Can SPEEDFIT pipe plug, plastic be used continuously at -20Â°C and withstand short-term exposure to 70Â°C in compressed air systems?

Yes. The SPEEDFIT pipe plug, plastic is rated for continuous operation from â20Â°C to +70Â°C, so it can be used continuously at â20Â°C in compressed air systems. It also withstands shortâterm exposure to +70Â°C; note the working pressure drops with temperature-10 bar at +23Â°C and 7 bar at +70Â°C-so ensure system pressure does not exceed the temperatureâdependent rating.

Does the SPEEDFIT pipe plug, plastic meet certification for use in compressed air at 10 bar and 70Â°C?

Yes. The SPEEDFIT pipe plug, plastic is certified by its specification for use in compressed air at 10 bar only at 23Â°C. The technical data state a working pressure of 10 bar at +23Â°C and 7 bar at +70Â°C, with an operating temperature range of â20Â°C to +70Â°C. Therefore it does not meet a 10 bar rating at 70Â°C; at 70Â°C its maximum working pressure is limited to 7 bar.

SPEEDFIT pipe plug, plastic

All products, Pneumatic piping systems/

Additional information

Material	P – material (plastic)

Pipe end cap for the SPEEDFIT system used in compressed air installations. Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
JG-PM4615E	Pipe plug 15 mm	-	-	In stock	Enquiry
JG-PM4618E	Pipe plug 18 mm	-	-	In stock	Enquiry
JG-PM4622E	Pipe plug 22 mm	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Pipe end cap for the SPEEDFIT system used in compressed air installations. Material: plastic. Working pressure: 10 bar (+23°C), 7 bar (+70°C). Operating temperature: from -20°C to +70°C.