Is the STORZ firefighter swivel coupling with BSP female thread, brass suitable for potable food or beverage transfer?

Short answer: No, the STORZ firefighter swivel coupling with BSP female thread, brass is not recommended for potable food or beverage transfer without further verification and possible modifications. Explanation: The coupling is made of brass and uses a black NBR (nitrile) rubber seal. While brass is commonly used in food-contact fittings, not all brass alloys are safe for potable use (some contain lead or other impurities) and must meet specific potable-water or food-contact standards (e.g., NSF/ANSI 61, EU regulation 1935/2004). NBR seals are resistant to oils and many liquids but are not universally approved for all food and beverage applications; food-grade elastomers such as FDA-compliant EPDM, FKM or food-grade NBR may be required depending on the product and temperature. Recommendation: Confirm with the manufacturer whether the specific brass alloy and black NBR seal used in the STORZ firefighter swivel coupling with BSP female thread, brass are certified for potable water or food/beverage contact (provide applicable standards/certifications). If not certified, request versions with food-grade materials/certified seals before using for consumable liquids.

Does the STORZ firefighter swivel coupling with BSP female thread, brass withstand corrosion from common chemicals in industrial transfer systems?

The STORZ firefighter swivel coupling with BSP female thread, brass offers good general resistance to corrosion and is suitable for many industrial transfer systems, including firefighting, irrigation, chemical and food industries. Brass resists water, oils and many nonâaggressive chemicals; the black NBR seal is compatible with hydrocarbons, mineral oils and many aqueous solutions. However, brass and NBR can be attacked by strong acids, strong alkalis, halogenated solvents, ammonia, and certain chlorinated or highly oxidizing chemicals. For systems handling aggressive chemicals, high concentrations, elevated temperatures or long exposure, verify chemical compatibility of brass and NBR with the specific substances (and concentrations/temperatures) used; consider alternative materials or protective measures if incompatibilities are found.

Can the STORZ firefighter swivel coupling with BSP female thread, brass be used with abrasive powders or granules in bulk transfer?

No. the STORZ firefighter swivel coupling with BSP female thread, brass is not suitable for handling abrasive powders or granules in bulk transfer as described. Why: - The product description specifies design for âliquid and bulk substancesâ and common sectors (firefighting, irrigation, chemical, food, agriculture), but the construction and materials indicate limitations for abrasive solids. - Material and seals: Body in brass with a black NBR (nitrile) rubber seal. NBR and brass are appropriate for many liquids and nonâabrasive materials, but abrasive powders/granules will cause rapid mechanical wear on the brass mating faces and deterioration or cutting of the rubber seal. - Mechanical design: Storz couplings are optimized for quick, leakâresistant connections under pressure for fluids. Repeated passage of abrasive particulates will abrade internal surfaces, damage the symmetrical connection faces and the seal, increase leakage risk and reduce service life. Seal integrity under particulate flow is particularly vulnerable. - Safety and pressure: Working pressure is 16 bar for fluids; particulate flow can create pulsations, blockages or uneven wear that compromise pressure performance. If you must handle abrasive powders/granules: - Use couplings and hoses specifically rated for abrasive bulk solids (explosion/ATEX considerations, wearâresistant materials such as hardened steel, tungsten carbide liners or special elastomers), and seals designed for solid handling. - Consult manufacturer technical data and test under expected operating conditions, or request an alternative coupling explicitly specified for abrasive solids. Conclusion: Do not use the STORZ firefighter swivel coupling with BSP female thread, brass for abrasive powders/granules in bulk transfer without manufacturer confirmation and appropriate wearâresistant design modifications.

STORZ firefighter swivel coupling with BSP female thread, brass

All products, Symmetrical claw couplings/

Additional information

Material	B – brass (bronze)
Standard length [m]	10

STORZ swivel coupling with internal BSP thread designed for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Symmetrical design of the connection part allows for easy coupling. Elements with the same coupling spacing can be connected. Material: brass. Working pressure: 16 bar. Seal: black NBR rubber.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
ST-23-066200-30	STORZ swivel connector 66 mm with 2" BSP male thread, brass	-	16	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

STORZ swivel coupling with internal BSP thread designed for transmission installations for liquid and bulk substances. Used in firefighting, irrigation systems, chemical industry, food industry, agriculture, etc. Symmetrical design of the connection part allows for easy coupling. Elements with the same coupling spacing can be connected. Material: brass. Working pressure: 16 bar. Seal: black NBR rubber.