Is the JIC straight fitting with carbon steel BSPT socket, type GE-BT, compatible with Teflon tape or anaerobic sealant for sealing the external BSPT thread?

Yes. The JIC straight fitting with carbon steel BSPT socket, type GE-BT, is designed for sealing on the external BSPT thread and is compatible with both Teflon tape and anaerobic sealants. Because the BSPT thread is tapered and relies on thread engagement for sealing, applying PTFE (Teflon) tape or an appropriate anaerobic thread sealant will provide a reliable leak-tight joint when installed correctly. Recommendations for best results: - Use only PTFE tape rated for hydraulic/industrial use; wrap 2â4 turns in the thread direction to avoid bunching. - Choose an anaerobic sealant formulated for metal pipe threads and compatible with hydraulic fluids and carbon steel. - Clean threads of oil, dirt and old sealant before application. - Assemble to specified torque to avoid overstressing the fitting or thread deformation. - If disassembly is expected, PTFE tape may be preferable; anaerobic sealants often cure and make disassembly more difficult. Following these practices will ensure proper sealing of the JIC straight fitting with carbon steel BSPT socket, type GE-BT.

Can JIC straight fitting with carbon steel BSPT socket, type GE-BT, be sealed reliably on the external BSPT thread using Teflon tape or anaerobic sealant?

Yes - a JIC straight fitting with carbon steel BSPT socket, type GE-BT, can be sealed reliably on the external BSPT (tapered) thread using proper application of PTFE (Teflon) tape or an anaerobic thread sealant. BSPT is a tapered, metal-to-metal sealing thread that relies primarily on thread interference; use of PTFE tape or an anaerobic compound is acceptable to fill gaps and prevent leakage. Best practices: wrap PTFE tape clockwise 3â5 turns starting at the second thread, avoid overfilling the thread root, and keep tape away from the first thread to prevent contamination of the joint; for anaerobic sealant, use one rated for steel and tapered threads, apply evenly, and allow full cure per manufacturer instructions. Ensure threads are clean, undamaged, and properly tightened to the recommended torque to achieve reliable sealing.

Can JIC straight fitting with carbon steel BSPT socket, type GE-BT, accept Teflon tape or anaerobic sealant on its external BSPT thread?

Yes. JIC straight fitting with carbon steel BSPT socket, type GE-BT can accept Teflon (PTFE) tape or an anaerobic thread sealant on its external BSPT thread. The product is specified as âseal on the thread â with Teflon tape or anaerobic sealant,â and the BSPT (British Standard Pipe Taper) thread is a tapered, sealing thread intended to form a pressure-tight joint by thread engagement and thread sealant. Use the following best practices: - Teflon tape: Apply PTFE tape sparingly and wrap in the thread direction (clockwise when viewed from the male end) so it does not unwind during assembly. Use 2â3 thin wraps, avoid overfilling the thread crests to prevent tape shredding or contamination of the fluid path. Ensure tape does not enter the mating port beyond the thread engagement. - Anaerobic sealant: Select a sealant rated for the service fluid, pressure, temperature, and materials (carbon steel). Apply a suitable amount to the male threads per manufacturer instructions and allow recommended cure time where applicable. Low- to medium-strength pipe-grade anaerobic sealants are commonly used for metal tapered threads. - Assembly: Follow recommended torque values for the fitting size and material to achieve proper crush/seal of the JIC 37Â° face while avoiding over-torquing. The primary metal-to-metal seal for the JIC side is the 37Â° seating surface; thread sealant on the BSPT thread prevents external leakage through the tapered thread. - Precautions: Do not use thread sealants that are incompatible with system fluids or that contain fillers which could clog hydraulic components. Clean threads of oil, dirt, and old sealant before applying new product. If disassembly and reassembly are frequent, choose a removable-grade sealant. In summary, JIC straight fitting with carbon steel BSPT socket, type GE-BT is designed to be sealed on the BSPT thread using either Teflon tape or an appropriate anaerobic sealant when used per manufacturer and sealant instructions.

Fitting straight JIC with BSPT male of carbon steel, type GE-BT

Additional information

Material	CS – steel (cast iron)

Fitting straight JIC 37° with BSPT male thread (sealing on the thread – PTFE tape or anaerobic sealant). Material: carbon steel, galvanized.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HJ-GE-07-BT-02	Fitting male JIC 7/16"-20 / 1/8" BSPT male	-	350	In stock	Enquiry
HJ-GE-07-BT-04	Fitting male JIC 7/16"-20 / 1/4" BSPT male	-	350	In stock	Enquiry
HJ-GE-08-BT-02	Fitting male JIC 1/2"-20 / 1/8" BSPT male	-	350	In stock	Enquiry
HJ-GE-08-BT-04	Fitting male JIC 1/2"-20 / 1/4" BSPT male	-	350	In stock	Enquiry
HJ-GE-09-BT-02	Fitting male JIC 9/16"-18 / 1/8" BSPT male	-	350	In stock	Enquiry
HJ-GE-09-BT-04	Fitting male JIC 9/16"-18 / 1/4" BSPT male	-	350	In stock	Enquiry
HJ-GE-09-BT-06	Fitting male JIC 9/16"-18 / 3/8" BSPT male	-	350	In stock	Enquiry
HJ-GE-09-BT-08	Fitting male JIC 9/16"-18 / 1/2" BSPT male	-	350	In stock	Enquiry
HJ-GE-12-BT-04	Fitting male JIC 3/4"-16 / 1/4" BSPT male	-	350	In stock	Enquiry
HJ-GE-12-BT-06	Fitting male JIC 3/4"-16 / 3/8" BSPT male	-	350	In stock	Enquiry
HJ-GE-12-BT-08	Fitting male JIC 3/4"-16 / 1/2" BSPT male	-	350	In stock	Enquiry
HJ-GE-12-BT-12	Fitting male JIC 3/4"-16 / 3/4" BSPT male	-	350	In stock	Enquiry
HJ-GE-14-BT-06	Fitting male JIC 7/8"-14 / 3/8" BSPT male	-	350	In stock	Enquiry
HJ-GE-14-BT-08	Fitting male JIC 7/8"-14 / 1/2" BSPT male	-	350	In stock	Enquiry
HJ-GE-14-BT-12	Fitting male JIC 7/8"-14 / 3/4" BSPT male	-	350	In stock	Enquiry
HJ-GE-17-BT-08	Fitting male JIC 1.1/16"-12 / 1/2" BSPT male	-	350	In stock	Enquiry
HJ-GE-17-BT-12	Fitting male JIC 1.1/16"-12 / 3/4" BSPT male	-	350	In stock	Enquiry
HJ-GE-17-BT-16	Fitting male JIC 1.1/16"-12 / 1" BSPT male	-	290	In stock	Enquiry
HJ-GE-21-BT-12	Fitting male JIC 1.5/16"-12 / 3/4" BSPT male	-	290	In stock	Enquiry
HJ-GE-21-BT-16	Fitting male JIC 1.5/16"-12 / 1" BSPT male	-	290	In stock	Enquiry
HJ-GE-26-BT-16	Fitting male JIC 1.5/8"-12 / 1" BSPT male	-	240	In stock	Enquiry
HJ-GE-26-BT-20	Fitting male JIC 1.5/8"-12 / 1.1/4" BSPT male	-	240	In stock	Enquiry
HJ-GE-30-BT-20	Fitting male JIC 1.7/8"-12 / 1.1/4" BSPT male	-	240	In stock	Enquiry
HJ-GE-30-BT-24	Fitting male JIC 1.7/8"-12 / 1.1/2" BSPT male	-	240	In stock	Enquiry