Is the Straight plug connector, stainless steel, AI-60040 suitable for use with aggressive chemicals and high-temperature sterilization?

Yes. The Straight plug connector, stainless steel, AI-60040 is suitable for use with many aggressive chemicals and for high-temperature sterilization within its specified limits. Rationale: - Corrosion resistance: Constructed entirely of AISI 316L stainless steel with no plastic parts, it offers very good resistance to corrosive agents and many aggressive chemicals commonly encountered in chemical, pharmaceutical, food and electronic industries. - Sealing compatibility: Seals are made of Viton (FKM), which provides strong chemical resistance to oils, fuels, many acids and solvents and maintains integrity over a wide temperature range compared with standard elastomers. - Temperature & pressure limits: The operating temperature range is â15Â°C to +225Â°C, so typical high-temperature sterilization processes (including many autoclave cycles up to ~225Â°C) are within its rated capability. Working pressure is 15 bar and vacuum rating 0.99 bar; ensure your process conditions stay within these limits. - Caveats: Some highly aggressive fluorinated compounds, hot caustics at extreme concentrations, or prolonged exposure to certain chemicals at peak temperature may still affect Viton or 316L; always verify chemical compatibility with the manufacturer and, if needed, test in application-specific conditions. Conclusion: For most aggressive chemicals and high-temperature sterilization within â15Â°C to +225Â°C and up to 15 bar, the Straight plug connector, stainless steel, AI-60040 is appropriate.verify specific fluid/temperature combinations against compatibility charts or with the supplier for edge cases.

Can the Straight plug connector, stainless steel, AI-60040 be autoclaved repeatedly without compromising the Viton seals?

Yes - the Straight plug connector, stainless steel, AI-60040 can be autoclaved repeatedly within typical steam sterilization conditions without compromising the Viton seals, provided autoclave temperatures do not exceed the materialâs rated continuous limit. Viton has an operating range up to about +200â225Â°C in many formulations; the AI-60040 lists an operating temperature up to +225Â°C, so standard autoclave cycles (121Â°Câ134Â°C) are safely within that range. Ensure cycles avoid prolonged exposure above +225Â°C and avoid aggressive oxidative sterilants that can degrade elastomers. Regular inspection of seals after repeated cycles is recommended.

Does the Straight plug connector, stainless steel, AI-60040 support use in food and pharmaceutical sanitary installations?

Yes. The Straight plug connector, stainless steel, AI-60040 is suitable for use in food and pharmaceutical sanitary installations. It is made entirely of AISI 316L stainless steel (a corrosion-resistant, low-carbon grade commonly specified for sanitary and hygienic applications), contains no plastic components, and uses Viton sealsâwhich offer chemical resistance and a wide temperature range (â15Â°C to +225Â°C). The product is explicitly described as used in the food and pharmaceutical industries and meets typical operational requirements (working pressure up to 15 bar, vacuum 0.99 bar). Notes: For regulatory compliance in specific sanitary/pharmaceutical processes you should verify any required certifications (e.g., FDA, USP Class VI, 3-A, EU food contact) and confirm that Viton seals and surface finish (Ra) meet your facilityâs standards.

Straight plug connector, stainless steel, AI-60040

All products, Push-in fittings/

Additional information

Material	SS – stainless steel

High-quality straight connector, made entirely of AISI 316L steel, series 60040. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AI-60040-04	Straight connector, 4 mm hose, AISI 316L	-	15	In stock	Enquiry
AI-60040-06	Straight connector, 6 mm hose, AISI 316L	-	15	In stock	Enquiry
AI-60040-08	Straight connector, 8 mm hose, AISI 316L	-	15	In stock	Enquiry
AI-60040-10	Straight connector, 10 mm hose, AISI 316L	-	15	In stock	Enquiry
AI-60040-12	Straight connector, 12 mm hose, AISI 316L	-	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High-quality straight connector, made entirely of AISI 316L steel, series 60040. No plastic components, and seals made of Viton ensure high resistance to corrosive agents and chemicals. Used in the chemical, food, pharmaceutical, electronic industries, and in medicine. Material: AISI 316L steel. Operating temperature: from -15°C to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. Seal: Viton.