Is the SAHARAÂ® LL BD or SAHARAÂ® LL BN/PRO hot air suction and discharge hose suitable for continuous use at +200Â°C and short-term exposure to +240Â°C?

Yes. The SAHARAÂ® LL BD and SAHARAÂ® LL BN/PRO hot air suction and discharge hoses are specified for continuous operation from â40Â°C to +200Â°C and may be exposed temporarily (short-term) to temperatures up to +240Â°C. They are designed for hot, dry air transfer (compressor to tank) in applications requiring a small bend radius, with construction (white EPR inner layer, synthetic braid and steel spiral reinforcement, EPDM outer layer) and ozone/weather resistance suitable for road tankers and industrial installations. Ensure installations and duty cycles conform to these temperature limits and follow manufacturer guidance for maximum short-term exposure.

Can the SAHARAÂ® LL BD or SAHARAÂ® LL BN/PRO hot air suction and discharge hose handle abrasive bulk materials like cement without accelerated wear?

Yes. SAHARAÂ® LL BD and SAHARAÂ® LL BN/PRO hot air suction and discharge hoses are suitable for handling abrasive dry bulk materials like cement. Their construction-white EPR inner layer, synthetic braid and steel spiral reinforcement, and durable EPDM outer layer-provides strong flexibility, kink resistance and robustness required for road tanker use (cement trucks, feed trucks) and other industrial installations. The hoses are designed for hot, dry air transfer under pressures up to 10 bar and temperatures â40Â°C to +200Â°C (temporarily up to +240Â°C), with outer-layer resistance to ozone and weather. While they resist abrasion well in typical pneumatic conveying conditions, extremely aggressive abrasion or improper operation will still increase wear, so monitoring and appropriate handling are recommended.

Does the SAHARAÂ® LL BD or SAHARAÂ® LL BN/PRO hose require special fittings for tanker compressor connections?

No. SAHARAÂ® LL BD and SAHARAÂ® LL BN/PRO hot air suction and discharge hoses do not inherently require special fittings for tanker compressor connections. They are designed for compressor-to-tank transfer of hot, dry air in road tankers and similar installations, with construction (EPR inner layer, synthetic braid and steel spiral reinforcement, EPDM outer layer) and a 10 bar working pressure that suit standard tanker compressor systems. However, ensure fittings and couplings: - match the hose inner diameter and profile, - are rated for the same pressure and temperature range (â40Â°C to +200Â°C, short-term to +240Â°C), - are compatible with abrasive/dusty bulk materials if applicable, - provide secure attachment for suction (vacuum) and discharge service. If your tanker uses proprietary or manufacturer-specified couplings, use the indicated adapters or flanges. For critical installations, consult the hose supplier or your tanker manufacturer to confirm the correct coupling type and any required clamps, flanges or adapters.

SAHARA® LL BD, SAHARA® LL BN/PRO hot air suction and discharge hose

Air and water hoses, All products/

Additional information

Material	EPM (EPR) – ethylene-propylene rubber
Maximum operating temperature [°C]	200
Minimum operating temperature [°C]	-40
Vacuum resistance	yes
Standard length [m]	120, 60, 60 / 120
Reinforcement	steel spiral, synthetic cover

Strong, flexible, resistant to kinks suction and discharge hose designed for the transfer of hot, dry air from the compressor to the tank installation. Ideal for situations where a small bend radius is required. Used in road tankers for transporting bulk materials: cement trucks, feed trucks, etc., as well as in other industrial installations. The outer layer is resistant to ozone and weather conditions. Standard length: 60 m or 120 m. Inner layer: white EPR rubber. Reinforcement: synthetic braid, steel spiral. Outer layer: blue (SAHARA®LL BD) or black (SAHARA® LL BN/PRO) EPDM rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +200°C (temporarily up to +240°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
IV-SAHARA-LL-BD-025	SAHARA LL hose 25x37 mm	25	10	In stock	Enquiry
IV-SAHARA-LL-BD-032	SAHARA LL hose 32x44 mm	32	10	In stock	Enquiry
IV-SAHARA-LL-BD-038	SAHARA LL hose 38x50 mm	38	10	In stock	Enquiry
IV-SAHARA-LL-BD-040	Hose SAHARA LL BD 40x53 mm	40	10	In stock	Enquiry
IV-SAHARA-LL-BD-051	SAHARA LL hose 51x64 mm	50	10	In stock	Enquiry
IV-SAHARA-LL-BD-060	Sahara LL BD hose 60x78 mm	60	10	In stock	Enquiry
IV-SAHARA-LL-BD-063	Hose SAHARA LL BD 63.5x77.5 mm	65	10	In stock	Enquiry
IV-SAHARA-LL-BD-076	SAHARA LL BD hose 76x91 mm	75	10	In stock	Enquiry
IV-SAHARA-LL-BD-090	Sahara LL hose 90x105.5 mm	90	10	In stock	Enquiry
IV-SAHARA-LL-BD-102	Hose SAHARA LL BD 102x117.5 mm	100	10	In stock	Enquiry
IV-SAHARA-LL-BN-PRO-025	SAHARA LL BN PRO hose 25x37 mm	25	10	In stock	Enquiry
IV-SAHARA-LL-BN-PRO-032	SAHARA LL BN PRO hose 32x44 mm	32	10	In stock	Enquiry
IV-SAHARA-LL-BN-PRO-038	SAHARA LL BN PRO hose 38x51 mm	38	10	In stock	Enquiry
IV-SAHARA-LL-BN-PRO-051	SAHARA LL BN PRO hose 51x64.5 mm	50	10	In stock	Enquiry
IV-SAHARA-LL-BN-PRO-063	SAHARA LL BN PRO hose 63.5x77.5 mm	65	10	In stock	Enquiry
IV-SAHARA-LL-BN-PRO-076	SAHARA LL BN PRO hose 76x91 mm	75	10	In stock	Enquiry
IV-SAHARA-LL-BN-PRO-090	Hose SAHARA LL BN PRO 90x105.5 mm	90	10	In stock	Enquiry
IV-SAHARA-LL-BN-PRO-102	Hose SAHARA LL BN PRO 102x117.5 mm	100	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Strong, flexible, resistant to kinks suction and discharge hose designed for the transfer of hot, dry air from the compressor to the tank installation. Ideal for situations where a small bend radius is required. Used in road tankers for transporting bulk materials: cement trucks, feed trucks, etc., as well as in other industrial installations. The outer layer is resistant to ozone and weather conditions. Standard length: 60 m or 120 m. Inner layer: white EPR rubber. Reinforcement: synthetic braid, steel spiral. Outer layer: blue (SAHARA®LL BD) or black (SAHARA® LL BN/PRO) EPDM rubber. Working pressure: 10 bar. Operating temperature: from -40°C to +200°C (temporarily up to +240°C).

Additional information

Material	EPM (EPR) – ethylene-propylene rubber
Maximum operating temperature [°C]	200
Minimum operating temperature [°C]	-40
Vacuum resistance	yes
Standard length [m]	120, 60, 60 / 120
Reinforcement	steel spiral, synthetic cover