Is the SAHARAÂ® LO BN hot air suction and discharge hose suitable for continuous operation at temperatures up to +200Â°C and intermittent peaks to +240Â°C?

Yes. The SAHARAÂ® LO BN hot air suction and discharge hose is suitable for continuous operation at temperatures up to +200Â°C and can tolerate intermittent peaks up to +240Â°C. The specified operating temperature range is -40Â°C to +200Â°C with temporary exposure allowed up to +240Â°C, and its construction (white EPR inner layer, synthetic braid and steel spiral reinforcement, black corrugated EPDM outer layer) is designed for hot, dry air transmission in demanding applications.

Can SAHARAÂ® LO BN hot air suction and discharge hose be used for abrasive bulk materials like cement and feed?

Yes. SAHARAÂ® LO BN hot air suction and discharge hose is suitable for abrasive dry bulk materials like cement and feed. Its construction-white EPR rubber inner layer, synthetic braid and steel spiral reinforcement, and black corrugated EPDM outer layer-provides strength, flexibility and kink resistance needed for road tanker use and industrial installations. Designed for hot, dry air transfer from compressor to tank and with a working pressure up to 10 bar and wide temperature range (â40Â°C to +200Â°C, temporarily to +240Â°C), it handles the demands of conveying abrasive powders. For diameter 90 mm it is available in 2 m sections with soft, spiral-free ends to ease connections.

Does SAHARAÂ® LO BN hot air suction and discharge hose require special fittings for the 90 mm 2 m sections?

No. SAHARAÂ® LO BN hot air suction and discharge hose does not require special fittings for the 90 mm 2 m sections. The product description states these 2 m sections come with soft, spiral-free ends, which are intended to simplify connection to standard fittings used in road tanker and industrial installations. The hoseâs construction (white EPR inner layer, synthetic braid and steel spiral reinforcement, black corrugated EPDM outer layer) and its dimensional compatibility with common 90 mm connectors mean typical suction/discharge couplings and clamps for 90 mm hoses can be used. Ensure fittings and clamps selected are rated for the hoseâs working pressure (up to 10 bar) and operating temperature range (â40Â°C to +200Â°C, temporarily to +240Â°C), and are compatible with abrasive/dusty bulk materials if applicable.

SAHARA® LO BN hot air suction and discharge hose

Air and water hoses, All products/

Additional information

Material	EPM (EPR) – ethylene-propylene rubber
Maximum operating temperature [°C]	200
Minimum operating temperature [°C]	-40
Vacuum resistance	yes
Standard length [m]	60
Reinforcement	steel spiral, synthetic cover

Strong, flexible, resistant to kinks suction and discharge hose with a black corrugated outer layer, designed for the transmission of hot, dry air from the compressor to the tank installation. Ideal for situations where a small bending radius is required. Used in road tankers for transporting bulk materials: cement trucks, feed trucks, etc., as well as in other industrial installations. The outer layer is resistant to ozone and weather conditions. For a diameter of 90 mm available in 2 m sections with soft, spiral-free ends. Inner layer: white EPR rubber. Reinforcement: synthetic braid, steel spiral. Outer layer: black corrugated EPDM rubber. Working pressure: up to 10 bar. Operating temperature: from -40°C to +200°C (temporarily up to +240°C).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
IV-SAHARA-LO-BN-051	Hose SAHARA LO BN 51 mm	50	10	In stock	Enquiry
IV-SAHARA-LO-BN-063	Hose SAHARA LO BN 63.5 mm	65	10	In stock	Enquiry
IV-SAHARA-LO-BN-076	Hose SAHARA LO BN 76 mm	75	10	In stock	Enquiry
IV-SAHARA-LO-BN-090	Hose SAHARA LO BN 90 mm	90	10	In stock	Enquiry
IV-SAHARA-LO-BN-090-2M	Sahara LO hose 90 mm - section 2 m, soft ends L=100 mm	90	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Strong, flexible, resistant to kinks suction and discharge hose with a black corrugated outer layer, designed for the transmission of hot, dry air from the compressor to the tank installation. Ideal for situations where a small bending radius is required. Used in road tankers for transporting bulk materials: cement trucks, feed trucks, etc., as well as in other industrial installations. The outer layer is resistant to ozone and weather conditions. For a diameter of 90 mm available in 2 m sections with soft, spiral-free ends. Inner layer: white EPR rubber. Reinforcement: synthetic braid, steel spiral. Outer layer: black corrugated EPDM rubber. Working pressure: up to 10 bar. Operating temperature: from -40°C to +200°C (temporarily up to +240°C).

Additional information

Material	EPM (EPR) – ethylene-propylene rubber
Maximum operating temperature [°C]	200
Minimum operating temperature [°C]	-40
Vacuum resistance	yes
Standard length [m]	60
Reinforcement	steel spiral, synthetic cover