Is the T-piece "T" with 2xGW BSP/1xGZ, brass, type EW suitable for use at pressures up to 63 bar and temperatures from -10Â°C to +90Â°C?

Yes. The T-piece "T" with 2xGW BSP/1xGZ, brass, type EW is suitable for use at pressures up to 63 bar and temperatures from -10Â°C to +90Â°C, as those values match the specified working pressure and operating temperature range.

Can the T-piece "T" with 2xGW BSP/1xGZ, brass, type EW be used with potable water systems at 63 bar and -10Â°C to +90Â°C?

Yes. The T-piece "T" with 2xGW BSP/1xGZ, brass, type EW is specified for potable water service within the stated limits: working pressure up to 63 bar and operating temperature from -10Â°C to +90Â°C. Brass is commonly used for potable water fittings, but confirm the alloy and any required potable-water certification (e.g., NSF/WRAS/ACS) for your jurisdiction and ensure compatible seals and installation practices to meet local drinking-water regulations.

Does the T-piece "T" with 2xGW BSP/1xGZ, brass, type EW meet EN standards for use at up to 63 bar and -10Â°C to +90Â°C?

Based on the provided description, the T-piece "T" with 2xGW BSP/1xGZ, brass, type EW specifies material (brass), working pressure (up to 63 bar) and operating temperature range (â10Â°C to +90Â°C). Whether it âmeets EN standardsâ cannot be determined solely from those basic data points. Compliance with relevant EN standards depends on specific standard requirements (materials, dimensions/tolerances, thread specifications, pressure/temperature ratings, testing, marking, and certification) and on documented evidence such as conformity assessment, test reports or declarations of performance. Key points to verify for EN compliance: - Applicable EN standards: identify which EN(s) apply (e.g., EN 10226 for pipe threads, EN 1254/EN 12266 for fittings/pressure testing, or product-specific standards). The description does not cite any EN number. - Thread specification: âBSPâ must match the exact EN/ISO thread form and tolerances required by the standard. The description only states BSP internal/external threads without standard reference. - Pressure/temperature rating: 63 bar and â10Â°C to +90Â°C must be acceptable per the specific EN standard for that fitting geometry and material. Some standards require specific testing at rated conditions. - Material and treatment: EN standards may require specified brass alloys, mechanical properties, corrosion resistance and traceability. not provided in the description. - Testing and certification: compliance usually requires documented testing (strength, leak, endurance), factory production control and certification (e.g., CE marking where applicable). No test reports or declarations are provided. Conclusion: The T-piece "T" with 2xGW BSP/1xGZ, brass, type EW has nominal characteristics that could be compatible with many EN requirements (63 bar, â10Â°C to +90Â°C), but you cannot confirm EN compliance from this description alone. To confirm conformity, obtain the applicable EN standard reference(s), material specifications, test/certification documents (test reports, Declaration of Conformity or Certificate) and manufacturer confirmation that the product was manufactured and tested to those EN standards.

T-piece “T” with 2xGW BSP/1xGZ, brass, type EW

Additional information

Material	B – brass (bronze)

Brass “T” fitting with 2 x BSP internal threads and 1 x BSP external thread. Material: brass. Working pressure: up to 63 bar. Operating temperature: from -10°C to +90°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
EW-MS-18512	T-branch with G1/8" BSP, brass	-	63	In stock	Enquiry
EW-MS-18513	T-branch with G1/4" BSP, brass	-	63	In stock	Enquiry
EW-MS-18515	T-branch with G1/2" BSP, brass	-	63	In stock	Enquiry
EW-MS-18517	T-branch with G1/2" BSP, brass	-	63	In stock	Enquiry
EW-MS-18518	T-fitting with G1/2" BSP, brass	-	63	In stock	Enquiry
EW-MS-18519	T-branch with G1" BSP, brass	-	63	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Brass “T” fitting with 2 x BSP internal threads and 1 x BSP external thread. Material: brass. Working pressure: up to 63 bar. Operating temperature: from -10°C to +90°C.