Is the "T" plug tee with BSPT male thread, stainless steel, AI-60210 compatible with food- and pharmaceutical-grade sterilization processes?

The "T" plug tee with BSPT male thread, stainless steel, AI-60210 Format appears largely compatible with many food- and pharmaceutical-grade sterilization processes, with some caveats: Why it is suitable: - Material AISI 316L stainless steel is widely accepted for food and pharmaceutical applications due to excellent corrosion resistance and suitability for repeated cleaning and sterilization (including steam). - No plastic components eliminates concerns about melting, leaching, or degradation during high-temperature sterilization. - Operating temperature range (-15Â°C to +225Â°C) covers common sterilization methods such as autoclaving (typically 121â134Â°C) and hot-water/steam cleaning. - Viton seals offer good chemical resistance and thermal stability up to ~200â225Â°C, making them compatible with many cleaning agents and some sterilization cycles. - Usage described for food and pharmaceutical industries suggests design intent for such environments. Caveats / checks required: - Viton is not universally acceptable for all pharmaceutical applications.some processes require FDA/USP Class VI or EP-compliant elastomers; verify that the specific Viton compound used meets required regulatory standards (FDA, USP, EU regulations) for your application. - For sterilization above ~200â225Â°C or for certain aggressive sterilants (e.g., some concentrated oxidizers, peroxide plasma, or certain radiation regimens), confirm seal compatibility and long-term performance. - For validation in GMP environments, perform or obtain material certification, surface finish specification (Ra), cleaning validation data, and traceability/certificates of conformity. Conclusion: The "T" plug tee with BSPT male thread, stainless steel, AI-60210 Format is generally compatible with standard food and pharmaceutical sterilization processes (steam/autoclave, hot water, standard chemical cleaning), provided the Viton seal meets the specific regulatory and process requirements and you confirm material certifications and surface/validation data required by your facility.

Can the "T" plug tee with BSPT male thread, stainless steel, AI-60210 be used with aggressive solvents and strong acids without degradation of seals?

Yes. The "T" plug tee with BSPT male thread, stainless steel, AI-60210 can be used with many aggressive solvents and strong acids without degradation of seals, because it is made entirely of AISI 316L stainless steel (high corrosion resistance) and uses Viton seals, which offer excellent chemical resistance across a wide range of acids and solvents. Operating limits: -15Â°C to +225Â°C, up to 15 bar and vacuum 0.99 bar. Verify compatibility for specific chemicals and concentrations (some highly oxidizing acids at high temperature/concentration can still attack Viton or 316L); consult chemical compatibility charts or supplier for borderline/critical media.

Does the "T" plug tee with BSPT male thread, stainless steel, AI-60210 support sterilization at autoclave temperatures?

Yes. The "T" plug tee with BSPT male thread, stainless steel, AI-60210 Format supports autoclave sterilization. Justification from the product data: - Material AISI 316L stainless steel is widely used for autoclave-compatible fittings due to excellent corrosion resistance and high-temperature strength. - Operating temperature range is â15Â°C to +225Â°C; standard steam-autoclave cycles run at ~121Â°Câ134Â°C, well within this range. - No plastic components are present; seals are Viton (fluoroelastomer) which tolerates temperatures up to about 200â250Â°C depending on grade and exposure, so short autoclave cycles at 121Â°Câ134Â°C are typically acceptable. - The design is aimed at chemical, food, pharmaceutical and medical applications, implying suitability for sterilization processes. Caveats: - Verify the specific Viton grade and compatibility with repeated autoclave cycles and steam. some formulations can degrade faster under prolonged or repeated steam exposure. - If repeated/validated autoclaving is required for critical medical or pharmaceutical processes, confirm with the manufacturer for warranty/validation data or consider seals specified explicitly for steam-autoclave service (e.g., PTFE or EPDM grades rated for steam).

Tee plug-in “T” with a male BSP threadT, steel stainless, AI-60210

All products, Push-in fittings/

Additional information

Material	SS – stainless steel

High quality Connection Tee “T” with a male BSP threadT, made entirely of steel AISI 316L, series 60210. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AI-60210-04-02	Tee fitting T adjustable, hose 4 mm, 1/8" BSPT male, AISI 316L	-	15	In stock	Enquiry
AI-60210-04-04	Tee fitting T adjustable, hose 4 mm, 1/4" BSPT male, AISI 316L	-	15	In stock	Enquiry
AI-60210-06-02	Tee fitting T adjustable, hose 6 mm, 1/8" BSPT male, AISI 316L	-	15	In stock	Enquiry
AI-60210-06-04	Tee fitting T adjustable, hose 6 mm, 1/4" BSPT male, AISI 316L	-	15	In stock	Enquiry
AI-60210-08-02	Tee fitting T adjustable, hose 8 mm, 1/8" BSPT male, AISI 316L	-	15	In stock	Enquiry
AI-60210-08-04	Tee fitting T adjustable, hose 8 mm, 1/4" BSPT male, AISI 316L	-	15	In stock	Enquiry
AI-60210-10-04	Tee fitting T adjustable, hose 10 mm, 1/4" BSPT male, AISI 316L	-	15	In stock	Enquiry
AI-60210-10-06	Tee fitting T adjustable, hose 10 mm, 3/8" BSPT male, AISI 316L	-	15	In stock	Enquiry
AI-60210-10-08	Tee fitting T adjustable, hose 10 mm, 1/2" BSPT male, AISI 316L	-	15	In stock	Enquiry
AI-60210-12-06	Tee fitting T adjustable, hose 12 mm, 3/8" BSPT male, AISI 316L	-	15	In stock	Enquiry
AI-60210-12-08	Tee fitting T adjustable, hose 12 mm, 1/2" BSPT male, AISI 316L	-	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

High quality Connection Tee “T” with a male BSP threadT, made entirely of steel AISI 316L, series 60210. no element plastic, and seal made of Viton ensure high resistance to action agents corrosion and substances chemical. used in industry chemical, food, pharmaceutical, electronic and in medicine. Material: steel AISI 316L. Operating temperature: od -15°C up to +225°C. Working pressure: 15 bar. Vacuum: 0.99 bar. sealing: Viton.