Is the T-piece for coolant distribution system, 1/4" system, JETON suitable for continuous use at up to 3 bar and +65Â°C with acetal material?

Yes. The T-piece for coolant distribution system, 1/4" system, JETON Format, made of acetal, is specified for working pressure up to 3 bar and operating temperature up to +65Â°C, so it is suitable for continuous use within those limits. Ensure your application does not exceed 3 bar or +65Â°C, and consider fluid compatibility with acetal and any dynamic stresses or chemical exposure that might shorten service life.

Does the T-piece for coolant distribution system, 1/4" system, JETON resist common coolants and cleaning agents at up to +65Â°C and 3 bar?

Yes. The T-piece for coolant distribution system, 1/4" system, JETON is made of acetal and is specified for operating temperatures up to +65Â°C and working pressures up to 3 bar, so it will resist typical coolants and common cleaning agents used within those limits. Ensure the specific coolant/cleaner is compatible with acetal for long-term resistance; aggressive chemicals outside normal coolant formulations may still cause degradation.

Can the T-piece for coolant distribution system, 1/4" system, JETON be used with potable water at up to 3 bar and +65Â°C?

Yes. The T-piece for coolant distribution system, 1/4" system, JETON is made of acetal, rated for a working pressure up to 3 bar and an operating temperature up to +65Â°C, so it meets the stated pressure and temperature limits for potable water at those conditions. However, note that the product description specifies use as a coolant distribution fitting; acetal (POM) is generally compatible with cold and warm potable water, but it is not inherently certified potable-water safe unless the manufacturer explicitly states compliance with relevant drinking-water standards (e.g., NSF/ANSI 61, WRAS, ACS). If you require official potable-water approval or long-term compliance documentation, confirm with the manufacturer or supplier that this specific T-piece holds the necessary potable-water certifications.

T-piece for coolant distribution system, 1/4″ system, JETON

Air and water hoses, All products/

Additional information

Material	P – material (plastic)
Standard length [m]	15

Tee fitting for creating a coolant distribution system – 1/4″ system. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
JT-62426	Tee for distribution system (1/4" system)	-	3	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Tee fitting for creating a coolant distribution system – 1/4″ system. Material: acetal. Working pressure: up to 3 bar. Operating temperature: up to +65°C.