Tee type “T” Pure-Fit® SIB®, polypropylene or PVDF, system BarbLock®

Additional information

Material

P – material (plastic)

The Pure-Fit ® “T”-type tee is designed for Sani-Tech ® STHT ®, C-Flex ® and PharMed ® BPT biopharmaceutical hoses. It can also be used with other hoses of similar material (silicone, thermoplastic elastomer). The fitting is made of high-quality, high-purity plastic: polypropylene (PP) or polyvinylidene fluoride (PVDF), meeting the hygienic requirements of USP Class VI and/or USP and ISO 10993-5, free of BPA (Bisphenol A) and animal-derived substances. Hygienic properties confirmed by the Saint-Gobain validation guide. The Pure-Fit ® fitting should be mounted on the hose using special clamps (BarbLock ® system). The two parts of the clamp, slid onto each other, compress the hose around its entire circumference (360°), ensuring complete tightness of the connection, while also providing a smooth, stepless transition between the inner surface of the hose and the inside of the fitting tail (Smooth Inner Bore). This eliminates turbulence and dead spaces – flow stagnation areas that can be a site for bacterial growth. The use of Pure-Fit ® fittings mounted with Pure-Fit ® / BarbLock ® clamps provides significantly better tightness and hygienic properties of the connection compared to mounting with clamps/bands. Sterilization: by radiation (PP) or by radiation and in an autoclave (PVDF). Material: polypropylene (PP) or PVDF. Hardness: 85 Shore (A) (PP) or 78 Shore (A) (PVDF). Working pressure: 17 bar (20°C), 7 bar (93°C). Operating temperature: up to 93°C (PP) or up to 135°C (PVDF).

List of product variants

Article numberProduct variant nameDNBARAvailabilityPriceQuantityActionsCatalogue
VE-PFT-125-PPAFTee "T" PURE-FIT, hose 3.2 mm, PP317In stock0 zł
Enquiry
VE-PFT-125-PVDFTee "T" PURE-FIT, hose 3.2 mm, PVDF317In stock0 zł
Enquiry
VE-PFT-187-PPAFTee "T" PURE-FIT, hose 4.8 mm, PP517In stock0 zł
Enquiry
VE-PFT-187-PVDFTee "T" PURE-FIT, hose 4.8 mm, PVDF517In stock0 zł
Enquiry
VE-PFT-250-PPAFTee "T" PURE-FIT, hose 6.4 mm, PP617In stock0 zł
Enquiry
VE-PFT-250-PVDFTee "T" PURE-FIT, hose 6.4 mm, PVDF617In stock0 zł
Enquiry
VE-PFT-312-PPAFTee "T" PURE-FIT, hose 7.9 mm, PP817In stock0 zł
Enquiry
VE-PFT-312-PVDFTee "T" PURE-FIT, hose 7.9 mm, PVDF817In stock0 zł
Enquiry
VE-PFT-375-PPAFTee "T" PURE-FIT, hose 9.5 mm, PP1017In stock0 zł
Enquiry
VE-PFT-375-PVDFTee "T" PURE-FIT, hose 9.5 mm, PVDF1017In stock0 zł
Enquiry
VE-PFT-500-PPAFTee "T" PURE-FIT, hose 12.7 mm, PP1217In stock0 zł
Enquiry
VE-PFT-500-PVDFTee "T" PURE-FIT, hose 12.7 mm, PVDF1217In stock0 zł
Enquiry
VE-PFT-750-PPAFTee "T" PURE-FIT, hose 19.1 mm, PP2017In stock0 zł
Enquiry
VE-PFT-750-PVDFTee "T" PURE-FIT, hose 19.1 mm, PVDF2017In stock0 zł
Enquiry

Do you need a larger quantity of products or a bespoke quote?

The Pure-Fit ® “T”-type tee is designed for Sani-Tech ® STHT ®, C-Flex ® and PharMed ® BPT biopharmaceutical hoses. It can also be used with other hoses of similar material (silicone, thermoplastic elastomer). The fitting is made of high-quality, high-purity plastic: polypropylene (PP) or polyvinylidene fluoride (PVDF), meeting the hygienic requirements of USP Class VI and/or USP and ISO 10993-5, free of BPA (Bisphenol A) and animal-derived substances. Hygienic properties confirmed by the Saint-Gobain validation guide. The Pure-Fit ® fitting should be mounted on the hose using special clamps (BarbLock ® system). The two parts of the clamp, slid onto each other, compress the hose around its entire circumference (360°), ensuring complete tightness of the connection, while also providing a smooth, stepless transition between the inner surface of the hose and the inside of the fitting tail (Smooth Inner Bore). This eliminates turbulence and dead spaces – flow stagnation areas that can be a site for bacterial growth. The use of Pure-Fit ® fittings mounted with Pure-Fit ® / BarbLock ® clamps provides significantly better tightness and hygienic properties of the connection compared to mounting with clamps/bands. Sterilization: by radiation (PP) or by radiation and in an autoclave (PVDF). Material: polypropylene (PP) or PVDF. Hardness: 85 Shore (A) (PP) or 78 Shore (A) (PVDF). Working pressure: 17 bar (20°C), 7 bar (93°C). Operating temperature: up to 93°C (PP) or up to 135°C (PVDF).

Additional information

Material

P – material (plastic)

Do you need a larger quantity of products or a bespoke quote?

Sales Network
Check

Inquiry
Send

Related Products

If you need help choosing a product or haven’t found the right one?