Is the Teflon hose for hydraulic, pneumatic, gas systems CHEMFLUOR TH suitable for use at 200Â°C with a working pressure of 345 bar?

Yes. The Teflon hose for hydraulic, pneumatic, gas systems CHEMFLUOR TH is rated for an operating temperature range up to +200Â°C and a nominal working pressure of 345 bar. The specifications show: operating temperature â50Â°C to +200Â°C and working pressure 345 bar, so using it at 200Â°C with a working pressure of 345 bar is within the stated limits. Note: burst pressure decreases with temperature (1100 bar at 20Â°C, 820 bar at 200Â°C), so ensure system safety factors, transients and application-specific requirements are acceptable.

Can the Teflon hose for hydraulic, pneumatic, gas systems CHEMFLUOR TH safely handle electrostatic discharge during high-pressure operation?

Yes. The Teflon hose for hydraulic, pneumatic, gas systems CHEMFLUOR TH is designed to safely handle electrostatic discharge during high-pressure operation. Its inner layer is made of conductive PTFE specifically to prevent accumulation of electrostatic charges, providing a conductive path to dissipate any charge buildup. Combined with an AISI 304 steel braid reinforcement and rated working pressure up to 345 bar (burst 1100 bar at 20Â°C, 820 bar at 200Â°C) and operating temperature range â50Â°C to +200Â°C, the construction supports safe use where electrostatic dissipation is required. Ensure installation and grounding follow applicable industry standards and safety procedures for your specific application.

Does the Teflon hose for hydraulic, pneumatic, gas systems CHEMFLUOR TH require special fittings for AISI 304 braid at 345 bar?

Does the Teflon hose for hydraulic, pneumatic, gas systems CHEMFLUOR TH require special fittings for AISI 304 braid at 345 bar? Yes. use fittings compatible with PTFE hose and AISI 304 braid rated for the hoseâs maximum working pressure (345 bar) and temperature range. Why: CHEMFLUOR TH has a conductive PTFE liner and an AISI 304 steel braid reinforcement. To maintain pressure integrity and safety at 345 bar, fittings must: - Be mechanically rated â¥345 bar at operating temperature (check de-rating at high temperatures). - Provide proper hose-to-fitting retention for PTFE-lined hose (e.g., swaged, crimped, or clamp systems designed for PTFE/PTFE-liner hoses). - Be compatible with AISI 304 braid (corrosion and mechanical interface) and not damage the braid during assembly. - Preserve conductivity if electrostatic dissipation is required (use conductive fittings/grounding provisions). - Seal effectively with PTFE (appropriate ferrules, sleeves, or inserts to prevent extrusion of the soft PTFE liner). Recommendation: Use manufacturer-recommended fittings or qualified high-pressure fittings specified for PTFE-lined hoses with 304 stainless braid, and follow proper assembly/crimping procedures and pressure/temperature ratings. If electrostatic conductivity is critical, select fittings that ensure a conductive path to ground.

Hose PTFE for installations hydraulic, pneumatic, gas CHEMFLUOR TH

All products, PTFE hoses/

Additional information

Material	PTFE – teflon and similar
Maximum operating temperature [°C]	200
Minimum operating temperature [°C]	-50
Vacuum resistance	no
Standard length [m]	10.5, 12

Hose CHEMFLUOR TH is flexible a hose PTFE and intended is for high-pressure installations hydraulic, pneumatic and gas. Layer inner made with conductive PTFE prevents accumulation charges electrostatic. Material hose: black, conductive PTFE. Reinforcement: braid of steel AISI 304. temperature use: from -50°C to +200°C. pressure working: 345 bar. pressure bursting for 20°C: 1100 bar. pressure bursting for 200°C: 820 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
VE-1704TH000	Hose CHEMFLUOR TH 5.6x9.5 mm	6	345	In stock	Enquiry
VE-1706TH000	Hose CHEMFLUOR TH 7.8x12 mm	8	345	In stock	Enquiry
VE-1708TH000	Hose CHEMFLUOR TH 10.2x15.2 mm	10	345	In stock	Enquiry
VE-1710TH000	Hose CHEMFLUOR TH 12.6x18 mm	12	345	In stock	Enquiry
VE-1712TH000	Hose CHEMFLUOR TH 15.7x24.6 mm	16	345	In stock	Enquiry
VE-1716TH000	Hose CHEMFLUOR TH 22x31.8 mm	22	345	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Hose CHEMFLUOR TH is flexible a hose PTFE and intended is for high-pressure installations hydraulic, pneumatic and gas. Layer inner made with conductive PTFE prevents accumulation charges electrostatic. Material hose: black, conductive PTFE. Reinforcement: braid of steel AISI 304. temperature use: from -50°C to +200°C. pressure working: 345 bar. pressure bursting for 20°C: 1100 bar. pressure bursting for 200°C: 820 bar.

Additional information

Material	PTFE – teflon and similar
Maximum operating temperature [°C]	200
Minimum operating temperature [°C]	-50
Vacuum resistance	no
Standard length [m]	10.5, 12