LPG polyester braided thermoplastic hose
Lightweight, flexible hose designed for low-pressure industrial installations. Particularly recommended for autogas (LPG – Liquefied Petroleum Gas). Used in automotive LPG systems as a connection between the tank and other system components. To maintain LPG homologation, special brass screw fittings must be installed. Standards: ECE R67-01. Installation: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -25°C to +125°C.
List of product variants
| Article number | Product variant name | Nominal inner diameter | Working pressure [bar] | Enquiry |
|---|---|---|---|---|
| LE-LPG-05F | Thermoplastic hose LPG 3/16" (5x9.6 mm), standard, 30 bar | 5 | 30 | |
| LE-LPG-06F | Thermoplastic LPG hose 1/4" (6.5x12.2 mm), standard, 30 bar | 6 | 30 |
Lightweight, flexible hose designed for low-pressure industrial installations. Particularly recommended for autogas (LPG – Liquefied Petroleum Gas). Used in automotive LPG systems as a connection between the tank and other system components. To maintain LPG homologation, special brass screw fittings must be installed. Standards: ECE R67-01. Installation: contact TUBES INTERNATIONAL®. Inner layer: polyamide. Reinforcement: polyester braid. Outer layer: micro-perforated polyurethane. Operating temperature: from -25°C to +125°C.
Additional information
| Material | PA – polyamide |
|---|---|
| Maximum operating temperature [°C] | 125 |
| Minimum operating temperature [°C] | -25 |
| Vacuum resistance | check |
Additional information
| Material | PA – polyamide |
|---|---|
| Maximum operating temperature [°C] | 125 |
| Minimum operating temperature [°C] | -25 |
| Vacuum resistance | check |
