Can the TW coupling DIN 28450 with GW BSP, stainless steel, type MK be used with temperatures down to -20Â°C and pressures up to 16 bar for liquids and gases (excluding liquefied gas/vapor)?

Yes. TW coupling DIN 28450 with GW BSP, stainless steel, type MK is specified for liquids and gases (excluding liquefied gas/vapor) at pressures from -0.8 bar up to 16 bar and for operating temperatures from -20Â°C to +65Â°C, taking into account the medium and the sealing material. Sealing materials provided: joint seal (GSD for 4" TWO) is hypalon and thread seal (GD) is PTFE (Teflon). Ensure the specific process medium and its compatibility with AISI 316 and the chosen seal (hypalon or PTFE) for safe operation at the indicated temperature and pressure limits.

Is the TW coupling DIN 28450 with GW BSP, stainless steel, type MK suitable for bulk materials as well as liquids and gases?

Yes. TW coupling DIN 28450 with GW BSP, stainless steel, type MK is suitable for liquids, bulk materials, and gases (except liquefied gas and vapor). It is manufactured to EN ISO 14420-6 (formerly DIN 28450) from AISI 316, rated for pressures from -0.8 bar to 16 bar and temperatures from -20Â°C to +65Â°C (dependent on medium and seal). Joint seal (GSD for 4" TWO) is hypalon; thread seal (GD) is PTFE. Ensure compatibility of seals with your specific medium and operating conditions.

Does the TW coupling DIN 28450 with GW BSP, stainless steel, type MK require special seals for acidic or abrasive media?

TW coupling DIN 28450 with GW BSP, stainless steel, type MK does not require special seals beyond the ones specified for general corrosive or abrasive service, but selection must match the mediumâs properties. The standard configuration uses: - Joint sealing (seal type GSD, for 4" type TWO): hypalon. suitable for many acids and alkaline solutions but limited with strong oxidizers, certain hydrocarbons, and high temperatures. - Thread sealing (seal type GD): PTFE (Teflon). chemically resistant to a wide range of acids and abrasive media. For acidic or abrasive media consider: - Chemical compatibility: verify hypalon compatibility with specific acids present (concentration and temperature). If incompatibility is identified, replace joint seal with a more chemical-resistant elastomer (e.g., Viton/FKM, EPDM, or perfluoroelastomer) or use a PTFE-based envelope seal. - Abrasion resistance: abrasive slurries can rapidly wear elastomeric seals; consider using harder or lined sealing solutions (PTFE, filled PTFE, or metal-encapsulated seals) or protective seat designs. - Temperature and pressure limits: ensure the chosen seal retains integrity within -20Â°C to +65Â°C and up to 16 bar for the application. - Compatibility testing and supplier guidance: consult seal manufacturers or the coupling supplier with full media composition, concentration, temperature, and flow/particulate data to confirm the optimal seal material. In summary: standard hypalon (GSD) and PTFE (GD) seals are broadly resistant, but for strong acids or highly abrasive media you should specify chemically/abrasion-resistant alternatives after compatibility review.

TW coupling DIN 28450 with GW BSP, stainless steel, type MK

Additional information

Material	SS – stainless steel

Loading connection socket TW type MK with internal BSP thread. Manufactured according to standard EN ISO 14420-6 (formerly DIN 28450). Designed for liquids, bulk materials, and gases (except liquefied gas and vapor). Material: AISI 316 steel. Pressure: from -0.8 bar to 16 bar. Operating temperature: from -20°C to +65°C (considering the medium and sealing material). Joint sealing (seal type GSD, for 4″ type TWO): hypalon. Thread sealing (seal type GD): teflon.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
TW-MK-050-SS	MK50 connector (TW 1502) with 2" BSP thread, AISI 316	-	16	In stock	Enquiry
TW-MK-050-SSR	MK50 connector (TW 1502) with 2" BSP thread, AISI 316	-	16	In stock	Enquiry
TW-MK-080-SS	MK80 connector (TW 502) with 3" BSP thread, AISI 316	-	16	In stock	Enquiry
TW-MK-080-SSR	MK80 connector (TW 502) with 3" BSP thread, AISI 316	-	16	In stock	Enquiry
TW-MK-100-SS	MK100 connector with 4" BSP GW, AISI 316	-	16	In stock	Enquiry
TW-MK-100-SSR	MK100 connector with 4" BSP GW, AISI 316	-	16	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Loading connection socket TW type MK with internal BSP thread. Manufactured according to standard EN ISO 14420-6 (formerly DIN 28450). Designed for liquids, bulk materials, and gases (except liquefied gas and vapor). Material: AISI 316 steel. Pressure: from -0.8 bar to 16 bar. Operating temperature: from -20°C to +65°C (considering the medium and sealing material). Joint sealing (seal type GSD, for 4″ type TWO): hypalon. Thread sealing (seal type GD): teflon.