Is the ULTRACLEAN abrasive plug for hoses and pipes compatible with all hose materials and inner diameters within the 6â110 mm range?

The ULTRACLEAN abrasive plug for hoses and pipes is designed to operate across an inner diameter range of 6â110 mm, but compatibility with all hose materials is not guaranteed by the description. The product is intended for removing scale, rust and other deposits by being propelled through the hose or pipe with compressed air, so suitability depends on: - Inner diameter: the plug is available across the 6â110 mm range, so you must select the correct plug diameter to match the hose inner diameter for proper sealing and propulsion. - Hose material and condition: softer or more delicate inner linings (certain plastics, rubbers, coatings) may be damaged by an abrasive plug; very rigid or heavily corrugated surfaces may affect plug travel and cleaning effectiveness. - Geometry and fittings: bends, valves, couplings or abrupt diameter changes can impede the plug or cause damage. Recommendation: verify material compatibility and choose the exact plug diameter for your hose; if in doubt, consult the manufacturer or run a test on a sample section before full use.

Can the ULTRACLEAN abrasive plug for hoses and pipes be safely used with food-grade or silicone-lined hoses?

The ULTRACLEAN abrasive plug for hoses and pipes is designed to remove scale, rust and contaminants by being propelled through the hose or pipe with compressed air. Because it is an abrasive cleaning item, it can be aggressive to lining materials. It is not recommended for use with food-grade or silicone-lined hoses unless the manufacturer explicitly confirms compatibility: abrasive action can damage food-grade surfaces or silicone liners, contaminate product contact surfaces, or breach regulatory hygiene requirements. Before use, consult the hose or liner supplier and perform a risk assessment and test on a spare section; if compatibility cannot be confirmed, use non-abrasive cleaning methods or plugs specifically certified for food-contact and silicone-lined systems.

How quickly does the ULTRACLEAN abrasive plug for hoses and pipes remove different types of buildup?

The ULTRACLEAN abrasive plug for hoses and pipes removes buildup quickly and effectively, with speed depending on the type and thickness of the deposit, pipe diameter, and air pressure used. Typical performance: - Light deposits (thin film of sediment, soft organic fouling): removed within a single pass or a few passes; cleaning often completed in seconds to a minute per meter. - Moderate buildup (scale, light rust, mixed sediments): removed in a few passes; cleaning typically takes a few minutes per meter under recommended air pressure. - Heavy or compacted deposits (thick calcified scale, heavy corrosion layers): require multiple passes and higher air pressure; removal time ranges from several minutes to longer, depending on severity and plug diameter. - Soft contaminants and loose particles: cleared almost immediately as the plug displaces debris while propelled. - Irregular or adhesive residues: progress may be slower; repeated passes improve results. Smaller-diameter plugs (6â20 mm) are faster for short runs and tight spaces but may need more passes in heavily encrusted tubes. Larger-diameter plugs (above ~50 mm) cover more surface per pass and can be quicker in larger pipes. Overall throughput is optimized by choosing the correct plug diameter for the hose/pipe and using appropriate compressed-air settings. Bulk packaging availability does not affect cleaning speed.

ULTRACLEAN abrasive plug for hoses and pipes

All products, Other devices/

Additional information

Material	P – material (plastic)
Standard length [m]	10, 2, 3, 4

Cleaning plug for hoses and pipes intended for ULTRACLEAN devices. Used where a layer of scale, rust, and other contaminants accumulates on the inner surface of hoses and pipes. Cleaning involves propelling the plug using compressed air. Available diameter range 6 ÷ 110 mm. Possibility of sale in bulk packaging (the number of pieces in bulk packaging depends on the outer diameter of the plug).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
UC-A006	Cleaning cork A 6 mm	-	-	In stock	Enquiry
UC-A007	Cleaning cork A 7 mm	-	-	In stock	Enquiry
UC-A010	Cleaning plug A 10 mm	-	-	In stock	Enquiry
UC-A012	Cleaning plug A 12 mm	-	-	In stock	Enquiry
UC-A014	Cleaning plug A 14 mm	-	-	In stock	Enquiry
UC-A016	Cleaning plug A 16 mm	-	-	In stock	Enquiry
UC-A018	Cleaning cork A 18 mm	-	-	In stock	Enquiry
UC-A020	Cleaning plug A 20 mm	-	-	In stock	Enquiry
UC-A022	Cleaning plug A 22 mm	-	-	In stock	Enquiry
UC-A024	Cleaning plug A 24 mm	-	-	In stock	Enquiry
UC-A026	Cleaning plug A 26 mm	-	-	In stock	Enquiry
UC-A028	Cleaning plug A 28 mm	-	-	In stock	Enquiry
UC-A030	Cleaning plug A 30 mm	-	-	In stock	Enquiry
UC-A033	Cleaning plug A 33 mm	-	-	In stock	Enquiry
UC-A036	Cleaning plug A 36 mm	-	-	In stock	Enquiry
UC-A040	Cleaning plug A 40 mm	-	-	In stock	Enquiry
UC-A045	Cleaning plug A 45 mm	-	-	In stock	Enquiry
UC-A050	Cleaning plug A 50 mm	-	-	In stock	Enquiry
UC-A055	Cleaning plug A 55 mm	-	-	In stock	Enquiry
UC-A060	Cleaning plug A 60 mm	-	-	In stock	Enquiry
UC-A065	Cleaning plug A 65 mm	-	-	In stock	Enquiry
UC-A070	Cleaning plug A 70 mm	-	-	In stock	Enquiry
UC-A075	Cleaning plug A 75 mm	-	-	In stock	Enquiry
UC-A080	Cleaning plug A 80 mm	-	-	In stock	Enquiry
UC-A085	Cleaning plug A 85 mm	-	-	In stock	Enquiry
UC-A090	Cleaning plug A 90 mm	-	-	In stock	Enquiry
UC-A095	Cleaning plug A 95 mm	-	-	In stock	Enquiry
UC-A100	Cleaning plug A 100 mm	-	-	In stock	Enquiry
UC-A110	Cleaning plug A 110 mm	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Cleaning plug for hoses and pipes intended for ULTRACLEAN devices. Used where a layer of scale, rust, and other contaminants accumulates on the inner surface of hoses and pipes. Cleaning involves propelling the plug using compressed air. Available diameter range 6 ÷ 110 mm. Possibility of sale in bulk packaging (the number of pieces in bulk packaging depends on the outer diameter of the plug).