Is the Universal industrial worm band ASFA-L 9 mm, stainless steel suitable for food-grade applications and compliant with DIN 3017 and RoHS 2002/95/EC?

Yes. The Universal industrial worm band ASFA-L 9 mm, stainless steel is suitable for foodâgrade applications and compliant with DIN 3017 and RoHS 2002/95/EC. It is manufactured entirely from AISI 316 stainless steel (W5), recommended for the food, chemical and marine industries, and produced in accordance with the requirements of the DIN 3017 standard and the RoHS directive 2002/95/EC. Its smooth inner band and coldâextruded thread minimize hose damage, making it appropriate for hygienic food applications.

Can Universal industrial worm band ASFA-L 9 mm, stainless steel withstand corrosion in marine and chemical environments over long-term use?

Yes. Universal industrial worm band ASFA-L 9 mm, stainless steel, made entirely of AISI 316 (W5), is specifically specified for food, chemical and marine industries and manufactured to DIN 3017 and RoHS. AISI 316 offers excellent resistance to chloride-induced corrosion and many chemical exposures, so the clamp will withstand long-term use in typical marine and many chemical environments. However, absolute longevity depends on specific conditions (concentration and temperature of chemicals, continuous immersion, galvanic coupling, cyclic loads). For highly aggressive media (strong acids, concentrated chlorides at high temperature) or for critical long-term deployments, verify compatibility with the exact environment or consider higher grades/coatings and periodic inspection.

What torque range should be applied when tightening Universal industrial worm band ASFA-L 9 mm, stainless steel to avoid hose damage?

For Universal industrial worm band ASFA-L 9 mm, stainless steel, a safe tightening torque range to avoid hose damage is approximately 1.5â3.5 NÂ·m (13â31 inÂ·lb). Rationale: the clampâs coldâextruded smoothâinside 9 mm band and compact worm mechanism allow secure multiple clamping at relatively low torque. Start at the lower end (â1.5 NÂ·m) and increase only as needed to achieve a leakâfree seal, not exceeding â3.5 NÂ·m to minimize risk of compressing or cutting the hose material. For soft or thinâwalled hoses (silicone, EPDM, PVC) prefer 1.5â2.5 NÂ·m; for sturdier industrial rubber hoses 2.5â3.5 NÂ·m. Always verify with a pressure test after fitting.

ASFA-L 9 mm universal industrial worm-drive clamp, stainless steel

All products, Clamps for mounting ends/

Additional information

Material	SS – stainless steel

A high-quality general-purpose worm-drive clamp intended for quick and easy fastening of industrial hoses, made entirely of AISI 316 stainless steel, recommended for use in the food, chemical, marine and similar industries. Manufactured in accordance with the requirements of DIN 3017 and the RoHS Directive 2002/95/EC. The ASFA-L clamp with a band width of 9 mm is recommended for standard applications. The unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. Material: AISI 316 stainless steel (W5).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AB-03015759	Clamp ASFA-L 8÷16 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015767	Clamp ASFA-L 12÷22 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015775	Clamp ASFA-L 16÷27 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015783	Clamp ASFA-L 20÷32 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015804	Clamp ASFA-L 25÷40 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015812	Clamp ASFA-L 30÷45 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015820	Clamp ASFA-L 32÷50 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015839	Clamp ASFA-L 40÷60 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015847	Clamp ASFA-L 50÷70 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015855	Clamp ASFA-L 60÷80 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015863	Clamp ASFA-L 70÷90 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015871	Clamp ASFA-L 80÷100 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015880	Clamp ASFA-L 90÷110 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015898	Clamp ASFA-L 100÷120 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015900	Clamp ASFA-L 110÷130 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015919	Clamp ASFA-L 120÷140 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015927	Clamp ASFA-L 130÷150 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03015935	Clamp ASFA-L 140÷160 mm, width 9 mm, W5	-	-	In stock	Enquiry
AB-03016524	Clamp ASFA-L 12÷22 mm, width 9 mm, W2	-	-	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A high-quality general-purpose worm-drive clamp intended for quick and easy fastening of industrial hoses, made entirely of AISI 316 stainless steel, recommended for use in the food, chemical, marine and similar industries. Manufactured in accordance with the requirements of DIN 3017 and the RoHS Directive 2002/95/EC. The ASFA-L clamp with a band width of 9 mm is recommended for standard applications. The unique worm mechanism in a compact housing and the cold-formed thread in the band, smooth on the inside, ensure a secure, repeated grip without damaging the hose surface. Material: AISI 316 stainless steel (W5).