Is the Water and air gun, aluminum, AKBO safe for use in food processing and easy to sanitize for meat industry plants?

Based on the provided description, the Water and air gun, aluminum, AKBO appears suitable for use in meat industry plants but with some caveats regarding food-processing hygiene and sanitization: - Materials: Main body is aluminum, tips are chrome-plated brass, cover is EPDM rubber, and the nozzle is plastic. None of these materials are inherently prohibited in food environments; aluminum, chrome-plated brass, EPDM and many plastics are commonly used in food-service equipment. Chrome plating can provide a harder, corrosion-resistant surface. EPDM is widely used for seals in food and pharmaceutical industries when formulated with food-grade compounds. - Cleanability and sanitation: The design details matter. Smooth, non-porous surfaces (chrome-plated tips, polished aluminum) are easier to clean. EPDM rubber and some plastics can absorb residues or degrade under aggressive sanitizers or high temperatures; ensure the specific EPDM and plastic grades are compatible with your cleaning agents (chlorine, peracetic acid, caustic wash) and temperatures used in your plant. The hose fittings and any crevices or threads should be accessible for cleaning and free-draining to avoid biological harborage. - Pressure and use: Working pressure 5 bar and air-assisted stream increase cleaning force, which is beneficial for removing meat residues but may increase aerosolization risk. Use procedures should minimize splashing/aerosol generation to reduce cross-contamination. - Certification and verification: For definitive suitability, verify that the specific gun components are manufactured to food-contact or sanitary standards (e.g., NSF, FDA-compliant materials, or supplier declarations). Confirm chemical compatibility charts from the manufacturer and perform validation cleaning trials in your plant. Conclusion: Water and air gun, aluminum, AKBO can be safe and relatively easy to sanitize in meat processing if made from food-grade material grades, if EPDM/plastic parts are compatible with your sanitizers and temperatures, if the design allows thorough cleaning, and if operational controls limit aerosol risk. Obtain manufacturerâs material/certification data and conduct on-site validation before routine use.

Can the Water and air gun, aluminum, AKBO withstand continuous 5 bar operation in meat processing environments?

Water and air gun, aluminum, AKBO: Yes. The specification states working pressure 5 bar and design materials (aluminum body, chromeâplated brass tips, EPDM rubber cover, plastic nozzle) are common and suitable for meatâprocessing environments. EPDM is resistant to cleaning chemicals and temperatures typical in food plants, and chromeâplated brass tips resist corrosion; the 2Ã10 mm hose fittings fit standard supply lines. Ensure proper maintenance: inspect seals (EPDM), avoid abrasive cleaning that could damage the plastic nozzle, and verify compatibility of any cleaning chemicals used. If continuous nonstop operation is required, confirm duty cycle with the manufacturer to ensure longâterm durability.

Does the Water and air gun, aluminum, AKBO resist corrosion from meat plant cleaning chemicals?

Yes. Water and air gun, aluminum, AKBO resists corrosion from typical meat-plant cleaning chemicals, with some caveats. Why: The body is made of aluminum, which has good corrosion resistance in many environments and is widely used in food-processing equipment. The tips are chrome-plated brass, providing additional protection against chemical attack and wear. The cover is EPDM rubber, a material known for excellent resistance to hot water, steam, and many common detergents and alkalis used in meat-plant sanitation. The plastic nozzle also tolerates typical cleaning agents used at moderate temperatures and concentrations. Caveats and recommendations: - Strong acids (especially hydrochloric or sulfuric) and certain aggressive solvents can attack aluminum, brass plating, EPDM or the plastic; avoid prolonged exposure to high concentrations of such chemicals. - Very high-temperature caustic solutions or prolonged exposure to strong alkalis can eventually degrade some plastics or EPDM; follow chemical supplier guidelines. - Rinse thoroughly after chemical use to remove residues and minimize long-term exposure. - Inspect chrome plating and EPDM regularly for wear or damage; damaged plating or torn rubber reduces corrosion resistance. - For specific chemicals, concentrations and temperatures used in your plant, consult the chemical SDS and, if needed, test compatibility or contact the manufacturer for confirmation. Working pressure (5 bar) and the air-assisted design do not affect corrosion resistance but ensure the fittings and seals remain intact under operating conditions.

Gun water – air, aluminum, AKBO

All products, Low-pressure water spray guns/

Additional information

Light Gun water – air (air is used for increasing force stream). made with aluminum, fittings with brass chrome-plated, A guard with rubber EPDM, nozzle with plastic. used in plants industry meat. Connection: 2 x A fitting for hose 10 mm. Working pressure: 5 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AK-AWLU1-BL	Gun AKBO woda/powietrze with dwiema ends for hoses 10 mm, aluminum, blue	-	5	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Light Gun water – air (air is used for increasing force stream). made with aluminum, fittings with brass chrome-plated, A guard with rubber EPDM, nozzle with plastic. used in plants industry meat. Connection: 2 x A fitting for hose 10 mm. Working pressure: 5 bar.