Is the Water gun with rear trigger, stainless steel, AKBO BIG FLOW, blue compatible with food-grade systems given its EPDM covers and Viton (FDA) sealing?

Water gun with rear trigger, stainless steel, AKBO BIG FLOW, blue . based on the provided description, it appears largely compatible with food-grade systems but with important caveats. Why itâs promising: - Body material: stainless steel is commonly used in food applications for corrosion resistance and cleanability. - Sealing: Viton with an FDA claim suggests the specific Viton formulation meets FDA 21 CFR requirements for food contact (good for many food oils, fats, and high-temperature uses). - Covers: EPDM is widely accepted in food and beverage industries (good for water, acids/alkalis, steam) and typically food-compatible if produced to food-grade standards. Caveats and required verifications: - âViton (FDA)â and âEPDMâ must be certified food-grade by the specific manufacturer (documentation such as FDA compliance letters or specific food-contact certifications). Generic names alone donât guarantee compliance. - Check temperature/chemical compatibility: Max operating temperature +95Â°C is acceptable for many food processes, but verify compatibility with any cleaning agents (e.g., caustics, sanitizers) used in your system. - Ensure all wetted components (fasteners, internal finishes) are stainless food-grade (e.g., 316) and have appropriate surface finish (Ra) if required by your process. - Confirm the 1/2" NPT connection and flow rates suit your sanitary piping and pressure requirements and that the design allows proper cleaning/sanitation (no dead legs). Conclusion: Likely compatible if the Viton and EPDM are explicitly certified food-grade and the stainless steel/wetted parts meet food-grade specifications. Obtain manufacturer food-contact declarations and verify compatibility with your cleaning chemicals and process conditions before use.

Does the Water gun with rear trigger, stainless steel, AKBO BIG FLOW, blue allow flow adjustment while locked for continuous food-processing rinsing?

Yes. The Water gun with rear trigger, stainless steel, AKBO BIG FLOW, blue provides smooth flow regulation via its adjustable outlet nozzle and also includes a trigger lock. This allows you to lock the trigger for continuous rinsing while still adjusting the flow, making it suitable for continuous food-processing rinsing within its operating limits (max 24 bar, up to +95Â°C).

Can the Water gun with rear trigger, stainless steel, AKBO BIG FLOW, blue withstand prolonged use at 24 bar and +95Â°C without performance loss?

Yes. based on the provided specifications, the Water gun with rear trigger, stainless steel, AKBO BIG FLOW, blue is rated for a maximum working pressure of 24 bar and a maximum operating temperature of +95Â°C, so when operated within those limits it should withstand prolonged use without inherent loss of performance. Key points supporting this: - Materials and seals: stainless steel body with EPDM rubber covers and Viton (FDA) sealing are appropriate for high-pressure and high-temperature service up to the stated limits; Viton provides good thermal and chemical resistance near +95Â°C. - Rated limits: the declared maximum working pressure (24 bar) and maximum operating temperature (+95Â°C) define safe continuous operation; using the tool at or below these values aligns with its design. - Performance figures: specified flow rates (48 l/min at 5 bar, 90 l/min at 15 bar) indicate expected performance under typical pressures; performance loss would be unlikely if the gun is not exposed to conditions exceeding the ratings. Caveats and recommendations: - Avoid exceeding 24 bar or +95Â°C; short excursions above ratings, chemical attack, or cavitation may cause seal or component degradation and subsequent performance loss. - Regular inspection and maintenance of Viton seals, EPDM covers, nozzle and trigger mechanism will extend service life under prolonged use. - Confirm compatibility of any fluids or cleaning agents with EPDM and Viton to prevent premature seal failure. Conclusion: If used and maintained within the stated maximum working pressure (24 bar) and maximum operating temperature (+95Â°C), the Water gun with rear trigger, stainless steel, AKBO BIG FLOW, blue should withstand prolonged use without performance loss.

Water gun with rear trigger, stainless steel, AKBO BIG FLOW, blue

All products, Low-pressure water spray guns/

Additional information

AKBO water gun with increased flow made of stainless steel with a rear trigger. EPDM rubber covers, Viton sealing (FDA). It features an adjustable outlet nozzle, smooth flow regulation, and trigger lock. Connection: 1/2″ NPT. Maximum working pressure: 24 bar. Maximum operating temperature: +95°C. Weight: approx. 0.87 kg. Flow rate: 48 l/min (5 bar), 90 l/min (15 bar).

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AK-RBTB1-BL-U	AKBO BIG FLOW water gun, 1/2" NPT thread, rear trigger, AISI 316, blue	-	24	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

AKBO water gun with increased flow made of stainless steel with a rear trigger. EPDM rubber covers, Viton sealing (FDA). It features an adjustable outlet nozzle, smooth flow regulation, and trigger lock. Connection: 1/2″ NPT. Maximum working pressure: 24 bar. Maximum operating temperature: +95°C. Weight: approx. 0.87 kg. Flow rate: 48 l/min (5 bar), 90 l/min (15 bar).