Is the Water gun with trigger guard bail, brass, BLUE KING, blue safe for continuous use at 30 bar and +95Â°C with the trigger lock engaged?

Water gun with trigger guard bail, brass, BLUE KING, blue . based on the provided specifications, it is rated for a maximum working pressure of 30 bar and a maximum operating temperature of +95Â°C. The trigger lock is a designed feature for continuous operation and the gun includes robust materials (brass body, stainless steel trigger/guard/valve components, EPDM seals and covers) and a double seal on the stem for increased durability and safety. However, safe continuous use at the limits (30 bar and +95Â°C) with the trigger lock engaged depends on operating conditions and safety margins not fully described (duty cycle, water quality, thermal cycling, installation, maintenance, and applicable standards). If you must operate continuously at those exact limits, verify with the manufacturer or supplier that continuous operation at 30 bar and +95Â°C with the trigger lock engaged is explicitly approved for your specific application. If manufacturer confirmation is not available, avoid continuous operation at the absolute maximum ratings and implement monitoring, regular inspections, and appropriate safety measures.

Can the Water gun with trigger guard bail, brass, BLUE KING, blue be used with hot water up to +95Â°C for extended cleaning cycles?

Yes. Water gun with trigger guard bail, brass, BLUE KING, blue can be used with hot water up to +95Â°C. Its components-brass body, stainless steel trigger/guard/valve parts, and EPDM seals/covers-are compatible with high temperatures and the product specification lists a maximum operating temperature of +95Â°C. For extended cleaning cycles ensure operating pressure does not exceed 30 bar and inspect seals periodically for wear to maintain safety and performance.

Does the Water gun with trigger guard bail, brass, BLUE KING, blue require special maintenance after use with hard water or detergents?

Water gun with trigger guard bail, brass, BLUE KING, blue does not require any special maintenance after use with hard water or detergents beyond standard good practice, thanks to its materials and construction. Recommended care: - Rinse thoroughly with clean water after use to remove mineral deposits and detergent residues, especially when used with hard water or aggressive chemicals. - Operate the nozzle briefly while rinsing to flush internal passages and seals (EPDM seals are chemical- and temperature-resistant but benefit from removal of residues). - Dry external surfaces and the rubber cover to avoid long-term buildup; wipe stainless steel (AISI 304) parts to prevent spotting from minerals. - If mineral scale forms, treat affected areas with a mild descaler compatible with brass and stainless steel; avoid strong acids that could harm components or seals. - Lubrication is generally not required; if recommended by your facility procedures, use lubricants compatible with EPDM. - Inspect double stem seal, trigger guard, and connections (GW 1/2" BSP) periodically for wear or damage; replace seals if leaking. - Store in a dry place protected from freezing and prolonged exposure to harsh chemicals or UV. Following these simple steps will maintain performance and longevity for the Water gun with trigger guard bail, brass, BLUE KING, blue after use with hard water or detergents.

Water gun with a trigger guard bow, brass, BLUE KING, blue

All products, Low-pressure water spray guns/

Additional information

Water gun for applications industrial BLUE KING made with brass (trigger, Bow and element valve of steel stainless, cover with rubber EPDM, seal with EPDM). thanks to slight sizes and ergonomic handle convenient lies in hand the operator. additional comfort ensures soft A guard made with rubber EPDM. easy and quick regulation nozzle, without needs use additional tools, allows on precision adjustment beam water for defined use. The design nozzle reduces wear water o 16% in ratio for standard guns for washing, not losing at this effectiveness cleaning. Gun equipped is in strong cover trigger, of steel AISI 304 in rubber cover, protecting against uncontrolled opening stream water and against damage. W lower parts handle installed is lock trigger Intended for continuous use. greater safety and high durability gun ensures double sealing stem. Connection: 1/2″ BSP female. maximum Working pressure: 30 bar. Flow rate: 22.2 l/min (4 bar), 50 l/min (30 bar). Maximum Operating temperature: +95°C. weight: ok. 0.95 kg. dimensions: 190x145x50 mm.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
AK-MNP11-BL-LOG	Gun for wody BLUE KING, 1/2" BSP female, with a bail, brass, blue	-	30	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Water gun for applications industrial BLUE KING made with brass (trigger, Bow and element valve of steel stainless, cover with rubber EPDM, seal with EPDM). thanks to slight sizes and ergonomic handle convenient lies in hand the operator. additional comfort ensures soft A guard made with rubber EPDM. easy and quick regulation nozzle, without needs use additional tools, allows on precision adjustment beam water for defined use. The design nozzle reduces wear water o 16% in ratio for standard guns for washing, not losing at this effectiveness cleaning. Gun equipped is in strong cover trigger, of steel AISI 304 in rubber cover, protecting against uncontrolled opening stream water and against damage. W lower parts handle installed is lock trigger Intended for continuous use. greater safety and high durability gun ensures double sealing stem. Connection: 1/2″ BSP female. maximum Working pressure: 30 bar. Flow rate: 22.2 l/min (4 bar), 50 l/min (30 bar). Maximum Operating temperature: +95°C. weight: ok. 0.95 kg. dimensions: 190x145x50 mm.