Is WEICON Adhesive VA100 suitable for bonding flexible rubber to rigid plastics at temperatures down to -10Â°C?

Yes. WEICON Adhesive VA100 is suitable for bonding flexible rubber to rigid plastics at temperatures down to -10Â°C. The product description states it is specifically suitable for bonding rubber and plastics, and its usable temperature range runs from -10Â°C to approximately +80Â°C. It achieves initial strength in about 1 minute, and is available in pen-type 12 g or tube 3 g packaging.

Can WEICON Adhesive VA100 reliably bond rubber and plastic components for short-term loads at subzero temperatures?

Yes. WEICON Adhesive VA100 can reliably bond rubber and plastic components for short-term loads at subzero temperatures down to about â10Â°C. The product specification lists an operating temperature range from â10Â°C to approximately +80Â°C, so for brief, low-stress applications at temperatures slightly below freezing it is suitable. Key practical points: - Designed for bonding rubber and plastics (and metals to plastics/rubber), so compatibility is appropriate. - Initial strength develops quickly (approx. 1 minute), which helps in short-term service at low temperatures. - For reliable performance ensure proper surface preparation (clean, dry, degreased), tight fit/contact, and use appropriate amount of adhesive. - For static or higher loads, repeated thermal cycling, or temperatures lower than â10Â°C, performance may be compromised; consider a low-temperature-specific adhesive or additional mechanical fastening. Conclusion: For short-term, low-load use down to â10Â°C, WEICON Adhesive VA100 is a reliable choice; avoid using it for heavier loads, long-term exposure below â10Â°C, or critical structural joints.

WEICON Adhesive VA100

Q: Can WEICON Adhesive VA100 bond dissimilar plastics and metals while maintaining strength across -10Â°C to +80Â°C?

Yes. WEICON Adhesive VA100 can bond dissimilar plastics and metals while maintaining strength across the specified range. It is a universal cyanoacrylate adhesive suitable for bonding rubber and plastics, as well as metals with plastics and rubber. Its usable temperature range is from â10Â°C to approximately +80Â°C, and it achieves initial strength in about 1 minute. Available packaging: pen type 12 g or tube 3 g.

Adhesives and screw protections, All products/

Additional information

Universal cyanoacrylate adhesive. Suitable for bonding rubber and plastics as well as metals with plastics and rubber. Temperature range: from -10°C to approx. +80°C. Time to achieve initial strength: approx. 1 min. Packaging – pen type 12 g or tube 3 g.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
WE-VA100-P-012	Rubber and plastic adhesive VA100, medium viscosity (pen 12 g)	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Universal cyanoacrylate adhesive. Suitable for bonding rubber and plastics as well as metals with plastics and rubber. Temperature range: from -10°C to approx. +80°C. Time to achieve initial strength: approx. 1 min. Packaging – pen type 12 g or tube 3 g.