Is the FERRARI lever connector "Y" tee, carbon steel, type F.35 suitable for use in groundwater drainage and wastewater treatment at temperatures from -20Â°C to +50Â°C?

Yes. The FERRARI lever connector "Y" tee, carbon steel, type F.35 is specified for use in groundwater drainage and wastewater treatment and its listed operating temperature range (-20Â°C to +50Â°C) matches your stated conditions. Its construction.carbon steel with galvanization.and NR-SBR rubber sealing are appropriate for typical drainage and wastewater applications within that temperature range. Ensure compatibility with the specific chemical and mechanical conditions of your site (e.g., aggressive chemicals, abrasive solids, pressure, and required service life) and follow manufacturer installation and maintenance recommendations.

Can the FERRARI lever connector "Y" tee, carbon steel, type F.35 be used with aggressive wastewater or chemical-laden flows?

The FERRARI lever connector "Y" tee, carbon steel, type F.35 is intended for applications including wastewater treatment and sewage disposal, but its materials limit suitability for aggressive chemical-laden flows. Carbon steel (galvanized) and NRâSBR rubber sealing are not highly resistant to many aggressive chemicals, solvents or highly acidic/alkaline media. Operating temperature -20Â°C to +50Â°C is moderate. For aggressive wastewater or chemical streams you should verify chemical compatibility of the galvanizing and NRâSBR with the specific chemicals and concentrations involved; if incompatibility is suspected, select connectors with chemically resistant materials (e.g. stainless steel, special coatings, EPDM/Viton seals) or consult the manufacturer for validated resistance data.

Does the FERRARI lever connector "Y" tee, carbon steel, type F.35 require special maintenance after galvanization and NR-SBR sealing exposure?

No special maintenance is required specifically because the FERRARI lever connector "Y" tee, carbon steel, type F.35 has been galvanized and uses NRâSBR sealing, provided normal use conditions and the stated temperature range (â20Â°C to +50Â°C) are respected. Recommended routine care: - Regular visual inspections for damage, corrosion, abrasion or seal deterioration. - Clean external surfaces and sealing faces from dirt, chemical residues or debris that could impair sealing. - Check lever/clamping mechanism for smooth operation; lubricate moving parts with a compatible light lubricant only if movement becomes stiff (avoid solvents that may damage NRâSBR). - Replace the NRâSBR seals if you observe cracking, hardening, swelling, cuts or persistent leakage. - After exposure to aggressive chemicals, prolonged immersion, or temperatures outside the specified range, inspect more frequently and consider earlier seal replacement. - Store dry and protected from mechanical damage and UV exposure when not in use. Following these standard maintenance steps will preserve galvanization and NRâSBR performance and ensure safe, reliable operation.

FERRARI lever connector “Y” tee, carbon steel, type F.35

All products, Lever couplings/

Additional information

Material	CS – steel (cast iron)

Y-branch lever coupling FERRARI with socket and 2 x plug coupling, type F.35, for use in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment, sewage disposal, environmental protection. Material: carbon steel, galvanized. Sealing: NR-SBR rubber. Operating temperature: from -20°C to +50°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
OM-F35-060	Symmetrical curved tee FERRARI 60 mm (socket / 2 x plug)	-	10	In stock	Enquiry
OM-F35-080	Symmetrical curved tee FERRARI 80 mm (socket / 2 x plug)	-	9	In stock	Enquiry
OM-F35-100	Symmetrical curved tee FERRARI 100 mm (socket / 2 x plug)	-	8	In stock	Enquiry
OM-F35-120	Symmetrical curved tee FERRARI 120 mm (socket / 2 x plug)	-	7	In stock	Enquiry
OM-F35-150	Symmetrical curved tee FERRARI 150 mm (socket / 2 x plug)	-	6	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Y-branch lever coupling FERRARI with socket and 2 x plug coupling, type F.35, for use in agriculture, horticulture, industry, construction, road and tunnel construction, groundwater drainage, wastewater treatment, sewage disposal, environmental protection. Material: carbon steel, galvanized. Sealing: NR-SBR rubber. Operating temperature: from -20°C to +50°C.