Is the T-piece "Y" with GW BSP, brass, type MU suitable for air systems up to 35 bar and +100Â°C?

Yes. The T-piece "Y" with GW BSP, brass, type MU is specified for industrial installations such as air systems with a working pressure up to 35 bar and an operating temperature up to +100Â°C, so it is suitable for air systems operating within those limits. Ensure system conditions (pressure spikes, media compatibility, sealing and thread standards) do not exceed these ratings and confirm installation follows applicable safety and regulatory requirements.

Can the T-piece "Y" with GW BSP, brass, type MU be used in industrial pneumatic installations subject to fluctuating pressures up to 35 bar?

Yes. The T-piece "Y" with GW BSP, brass, type MU Format is suitable for industrial pneumatic installations with fluctuating pressures up to 35 bar. The product description specifies use in industrial installations (e.g., for air), brass construction, and a working pressure of up to 35 bar, which matches your pressure requirement; operating temperature is rated up to +100Â°C. Ensure correct thread compatibility (internal BSP) and confirm installation and dynamic pressure spikes remain within the 35 bar limit and applicable safety factors for your system.

Does the T-piece "Y" with GW BSP, brass, type MU meet industry standards for air at 35 bar and +100Â°C?

Based on the provided description, the T-piece "Y" with GW BSP, brass, type MU appears suitable for use with air at up to 35 bar and +100Â°C. The listed working pressure (âup to 35 barâ) and operating temperature (âup to +100Â°Câ) match the service conditions you specified, and the material (brass) is commonly used for compressed air fittings in industrial installations. Caveats: confirm that âup toâ includes any required safety margin for your application, verify compatibility with the specific air composition (e.g., lubricated, dry, or containing contaminants), check thread and sealing requirements for BSP internal connections, and ensure compliance with any applicable industry or regulatory standards (e.g., PED, ISO) required for your installation. If the installation involves cyclic pressure, shock loads, or higher temperatures, request detailed datasheets, test certificates, and manufacturer approval.

A tee “Y” with female thread BSP, brass, type MU

Additional information

Standard length [m]	10

A tee “Y” with a thread internal BSP for use in installations industrial, np. for air. Material: brass. Working pressure: up to 35 bar. Operating temperature: up to +100°C.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
MU-1190	Tee Y with 1/2" BSP female, brass	-	-	In stock	0 zł		Enquiry
MU-1191	Tee Y with 3/8" BSP female, brass	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

A tee “Y” with a thread internal BSP for use in installations industrial, np. for air. Material: brass. Working pressure: up to 35 bar. Operating temperature: up to +100°C.