Steam hose end with GW, AISI 316 stainless steel GF BOSS
Internal thread BSP and NPT fittings for rubber hoses for steam, with a ribbed tail for the hose, with a lock – for installation in the hose using BOSS SBC type steam clamps. The complete fitting consists of three parts – a spherical end GB with a spigot (“tail”) for the hose, a wing nut B with a special internal thread (NPS), and a special adapter GFB with an external thread (NPS) matching the nut and an internal thread of the same size as the fitting. The GFB adapter has a conical polymer or copper insert, working with the spherical end. This creates a tight, steam-resistant, and high-temperature connection that is also easy to unscrew and screw without the use of special tools, using the wing nut. Due to the reduced design of the lock (flange) of the 2” fitting, BOSS SBC 2” steam clamps with 4 claws should not be used. Material: stainless steel AISI 316. Working pressure: 18 bar (+210°C) – saturated steam. Operating temperature: up to +230°C.
List of product variants
| Article number | Product variant name | Nominal inner diameter | Working pressure [bar] | Enquiry |
|---|---|---|---|---|
| DX-GF-12-12-SS | GF end with GW BSP 3/4", hose 3/4", AISI 316 | 20 | 18 | |
| DX-GF-12-12-SS-NPT | GF end with GW NPT 3/4", hose 3/4", AISI 316 | 20 | 18 | |
| DX-GF-16-16-SS | GF end with GW BSP 1", hose 1", AISI 316 | 25 | 18 | |
| DX-GF-16-16-SS-NPT | GF end with GW NPT 1", hose 1", AISI 316 | 25 | 18 | |
| DX-GF-20-20-SS | GF end with GW BSP 1.1/4", hose 1.1/4", AISI 316 | 32 | 18 | |
| DX-GF-20-20-SS-NPT | GF end with GW NPT 1.1/4", hose 1.1/4", AISI 316 | 32 | 18 | |
| DX-GF-24-24-SS | GF end with GW BSP 1.1/2", hose 1.1/2", AISI 316 | 38 | 18 | |
| DX-GF-24-24-SS-NPT | GF end with GW NPT 1.1/2", hose 1.1/2", AISI 316 | 38 | 18 | |
| DX-GF-32-32-SS | GF end with GW BSP 2", hose 2", AISI 316 | 50 | 18 | |
| DX-GF-32-32-SS-NPT | GF end with GW NPT 2", hose 2", AISI 316 | 50 | 18 |
Internal thread BSP and NPT fittings for rubber hoses for steam, with a ribbed tail for the hose, with a lock – for installation in the hose using BOSS SBC type steam clamps. The complete fitting consists of three parts – a spherical end GB with a spigot (“tail”) for the hose, a wing nut B with a special internal thread (NPS), and a special adapter GFB with an external thread (NPS) matching the nut and an internal thread of the same size as the fitting. The GFB adapter has a conical polymer or copper insert, working with the spherical end. This creates a tight, steam-resistant, and high-temperature connection that is also easy to unscrew and screw without the use of special tools, using the wing nut. Due to the reduced design of the lock (flange) of the 2” fitting, BOSS SBC 2” steam clamps with 4 claws should not be used. Material: stainless steel AISI 316. Working pressure: 18 bar (+210°C) – saturated steam. Operating temperature: up to +230°C.
Additional information
| Material | SS – stainless steel |
|---|---|
| Standard length [m] | 50 |
Additional information
| Material | SS – stainless steel |
|---|---|
| Standard length [m] | 50 |
