Is the Elbow 90Â° with GW / GZ BSP, brass, type 3401 suitable for hot and cold water at -10Â°C to +100Â°C and 10 bar pressure?

Yes. The Elbow 90Â° with GW / GZ BSP, brass, type 3401 is described specifically for use in pipe connections such as hot and cold water installations. Its brass construction and stated operating temperature range of -10Â°C to +100Â°C and working pressure of 10 bar match the conditions you specified. Therefore it is suitable for hot and cold water at -10Â°C to +100Â°C and 10 bar pressure.

Can Elbow 90Â° with GW / GZ BSP, brass, type 3401 be used in potable water systems at temperatures -10Â°C to +100Â°C and 10 bar?

Yes. Elbow 90Â° with GW / GZ BSP, brass, type 3401 is specified for hot and cold water installations, made of brass, with an operating temperature range of -10Â°C to +100Â°C and a working pressure of 10 bar, so it meets the stated temperature and pressure requirements for potable water systems. Ensure threads, seals and installation comply with local potable water regulations and any required drinking-water material approvals or certifications before use.

Does Elbow 90Â° with GW / GZ BSP, brass, type 3401 comply with standards for potable water at -10Â°C to +100Â°C and 10 bar?

Based on the provided description, Elbow 90Â° with GW / GZ BSP, brass, type 3401 appears suitable for potable (drinking) water applications within the specified operating range: temperature from -10Â°C to +100Â°C and working pressure 10 bar. The description explicitly states use in hot and cold water installations, brass construction, and the exact temperature and pressure limits you asked about, which match potable water system requirements at those conditions. However, compliance with potable-water standards (e.g., NSF/ANSI 61, ACS, WRAS, KIWA or local/national approvals) cannot be confirmed from this description alone. Regulatory certifications and material suitability (lead content, dezincification resistance, sanitary finishes) are typically required to certify a fitting for potable water in specific markets. To fully confirm compliance for potable water at -10Â°C to +100Â°C and 10 bar, you should request from the manufacturer or supplier: - Relevant potable-water certifications or test reports (NSF/ANSI 61, WRAS, ACS, KIWA, etc.) - Material specification showing lead content and alloy designation - Evidence of dezincification resistance if required locally - Any applicable hygienic or corrosion-resistance test results If such documentation is provided and the limits match, then Elbow 90Â° with GW / GZ BSP, brass, type 3401 can be considered compliant for potable water within the stated temperature and pressure range.

Elbow 90° with GW / GZ BSP, brass, type 3401

Additional information

Material	B – brass (bronze)

90° elbow with internal and external BSP thread for use in pipe connections, e.g., hot and cold water installations. Material: brass. Operating temperature: from -10°C to +100°C. Working pressure: 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
RV-3401-04	90° elbow with male/female BSP 1/4", brass	-	10	In stock	Enquiry
RV-3401-06	90° elbow with male/female BSP 3/8", brass	-	10	In stock	Enquiry
RV-3401-08	90° elbow with male/female BSP 1/2", brass	-	10	In stock	Enquiry
RV-3401-12	90° elbow with male/female BSP 3/4", brass	-	10	In stock	Enquiry
RV-3401-16	90° elbow with male/female BSP 1", brass	-	10	In stock	Enquiry
RV-3401-20	90° elbow with male/female BSP 1.1/4", brass	-	10	In stock	Enquiry
RV-3401-24	90° elbow with male/female BSP 1.1/2", brass	-	10	In stock	Enquiry
RV-3401-32	90° elbow with male/female BSP 2", brass	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

90° elbow with internal and external BSP thread for use in pipe connections, e.g., hot and cold water installations. Material: brass. Operating temperature: from -10°C to +100°C. Working pressure: 10 bar.