Is the 90Â° elbow with BSP female/ BSPT male thread, stainless steel, type VT153 rated for continuous service at 10 bar operating pressure?

Yes. The 90Â° elbow with BSP female/ BSPT male thread, stainless steel, type VT153 is rated for continuous service at an operating pressure of 10 bar. The product description specifies material AISI 316 and a working pressure of 10 bar, which indicates it is designed to handle that pressure in normal industrial piping applications. Ensure installation, temperature limits, and any applicable standards or system safety factors are observed for continuous operation.

Can the 90Â° elbow with BSP female/ BSPT male thread, stainless steel, type VT153 withstand intermittent pressure surges above 10 bar?

Based on the provided description, the 90Â° elbow with BSP female/ BSPT male thread, stainless steel, type VT153 is specified with a working pressure of 10 bar. This rating indicates the maximum continuous working pressure for which the fitting is designed. Intermittent pressure surges above 10 bar exceed the stated working pressure and may risk deformation, thread damage, leakage or failure, especially if surges are frequent or of high magnitude. Without explicit manufacturer data on surge (short-term) or peak pressure limits, fatigue resistance or safety factors, you should assume it is not rated for sustained or repeated pressure spikes above 10 bar. For intermittent surges, consult the manufacturer or choose a fitting rated with an appropriate margin above expected peak pressures.

Does the 90Â° elbow with BSP female/ BSPT male thread, stainless steel, type VT153 require periodic torque checks at 10 bar?

No. The 90Â° elbow with BSP female/ BSPT male thread, stainless steel, type VT153, described as an AISI 316 component for piping connections with a working pressure of 10 bar, does not inherently require periodic torque checks solely because of its pressure rating. Routine torque verification is generally driven by assembly practice, thread sealing method (e.g., thread sealant, PTFE tape, or metal-to-metal seal), vibration or thermal cycling in the application, and applicable maintenance standards or customer specifications. Recommended actions: - Follow the manufacturerâs assembly torque or installation instructions if provided. - If no torque data is supplied, apply best-practice installation: ensure clean threads, use the appropriate sealant, and tighten to a controlled, consistent torque to achieve leak-free joint without overstressing the fitting. - Implement periodic inspections (visual leak checks, pressure tests) where system conditions include vibration, dynamic loads, or safety-critical service. - If the installation is safety-critical or exposed to aggressive operational conditions, establish a maintenance schedule that can include torque checks per site engineering or regulatory requirements. In summary, the 90Â° elbow with BSP female/ BSPT male thread, stainless steel, type VT153 does not automatically mandate periodic torque checks at 10 bar; do so based on installation guidance, sealing method, operating conditions, and safety/maintenance policies.

Elbow 90° with a thread internal BSP/external BSPT, steel stainless, type VT153

Additional information

Material	SS – stainless steel

Elbow 90° with a thread internal BSP and a BSPT male thread intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
NM-VT153-04	Elbow 90° with BSP female/1/4" BSPT male, AISI 316	-	10	In stock	Enquiry
NM-VT153-06	Elbow 90° with BSP female/ 3/8" BSPT male, AISI 316	-	10	In stock	Enquiry
NM-VT153-08	Elbow 90° with BSP female/ 1/2" BSPT male, AISI 316	-	10	In stock	Enquiry
NM-VT153-12	Elbow 90° with BSP female/ 3/4" BSPT male, AISI 316	-	10	In stock	Enquiry
NM-VT153-16	Elbow 90° with BSP female/ 1" BSPT male, AISI 316	-	10	In stock	Enquiry
NM-VT153-20	Elbow 90° with BSP female/ 1.1/4" BSPT male, AISI 316	-	10	In stock	Enquiry
NM-VT153-24	Elbow 90° with BSP female/ 1.1/2" BSPT male, AISI 316	-	10	In stock	Enquiry
NM-VT153-32	Elbow 90° with BSP female/ 2" BSPT male, AISI 316	-	10	In stock	Enquiry
NM-VT153-40	Elbow 90° with BSP female/ 2.1/2" BSPT male, AISI 316	-	10	In stock	Enquiry
NM-VT153-48	Elbow 90° with BSP female/ 3" BSPT male, AISI 316	-	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Elbow 90° with a thread internal BSP and a BSPT male thread intended for use in pipe connections of industrial installations. Material: steel AISI 316. Working pressure: 10 bar.