Can Quick coupler socket for injection molds with hose end with valve, DYROS series 90 withstand 15 bar pressure and Viton sealing for cooling liquids and compressed air applications?

Yes. Quick coupler socket for injection molds with hose end with valve, DYROS series 90 is designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications and similar technical fields. All components are brass (retaining rings, springs and balls in treated stainless steel) with Viton sealing and a stated working pressure of 15 bar, so it can withstand 15 bar pressure for cooling liquids and compressed air applications when used as specified.

Is the Quick coupler socket for injection molds with hose end with valve, DYROS series 90 compatible with aggressive cooling fluids and gas applications?

Yes. The Quick coupler socket for injection molds with hose end with valve, DYROS series 90 is suitable for aggressive cooling fluids and gas applications. It is designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications and similar technical fields. All components are brass with treated stainless steel retaining rings, springs and balls, and Viton seals, providing good chemical and temperature resistance. Working pressure is 15 bar. For extremely aggressive chemicals or unusually high temperatures/pressures, verify compatibility with the specific fluid and operating conditions.

Does the Quick coupler socket for injection molds with hose end with valve, DYROS series 90 require specific maintenance for brass and stainless steel parts?

Quick coupler socket for injection molds with hose end with valve, DYROS series 90 does not require special or frequent maintenance beyond standard good-practice care for fittings made of brass and stainless steel. Recommended maintenance: - Regular visual inspection: check for external damage, corrosion, leaks and proper seating of hose end and valve. - Cleaning: wipe external surfaces to remove dirt, coolant residues or chemical deposits. Use mild detergent and water; avoid strong acids or chlorinated solvents that can attack brass and Viton seals. - Seals: inspect Viton sealing elements for wear, cuts or hardening; replace if damaged or leaking. - Moving parts: check retaining rings, springs and balls (treated stainless steel) for free movement and signs of pitting or corrosion; clean with fresh water and dry. Do not lubricate with incompatible oils. use lubricants compatible with Viton if lubrication is necessary. - Pressure testing: periodically test under working pressure (up to 15 bar) after maintenance to confirm leak-tightness. - Chemical compatibility: ensure cooling liquids or gases used are compatible with brass and Viton to avoid accelerated degradation. - Storage: store dry and protected from corrosive atmospheres when not in use. If used in aggressive environments or with contaminated fluids, increase inspection frequency. Replace components showing corrosion, deformation or sealing failure to maintain safe operation.

Quick coupler socket for injection molds with hose end with valve, DYROS series 90

Additional information

Material	B – brass (bronze)

Quick coupling socket DYROS series 90 with hose end and shut-off valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: all components made of brass, while retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DY-LK911	DN 9 socket with 7/16" hose end, with valve	10	15	In stock	Enquiry
DY-LK916	DN 9 socket with 3/8" hose end, with valve	10	15	In stock	Enquiry
DY-LK918	DN 9 socket with 1/2" hose end, with valve	12	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Quick coupling socket DYROS series 90 with hose end and shut-off valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: all components made of brass, while retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.