Is the Quick-connect socket plug for injection molds, DYROS available with BSPT thread and suitable for 15 bar working pressure?

Yes. The Quick-connect socket plug for injection molds, DYROS is available with BSPT thread and is suitable for a 15 bar working pressure. The product is offered with either metric or BSPT thread, is made of brass, and is rated for 15 bar.

Does the Quick-connect socket plug for injection molds, DYROS come in brass and support both metric and BSPT threads?

Yes. Quick-connect socket plug for injection molds, DYROS is made of brass and is available with either metric or BSPT threads; working pressure is 15 bar.

Can the Quick-connect socket plug for injection molds, DYROS be used as a blind plug for other hydraulic systems at 15 bar?

Yes. the Quick-connect socket plug for injection molds, DYROS can be used as a blind plug for other hydraulic systems at 15 bar, provided the following conditions are met: - Thread compatibility: choose the plug with the correct metric or BSPT thread to match the system port. Incorrect thread type or size will prevent proper sealing and can cause leaks or damage. - Pressure rating: the plugâs working pressure is 15 bar, so it is suitable only for systems whose maximum operating pressure does not exceed 15 bar (including pressure spikes). - Fluid and material compatibility: the plug is made of brass. Ensure brass is compatible with the hydraulic fluid and the system environment (corrosion, galvanic effects, chemical exposure). - Temperature and dynamic conditions: verify the systemâs temperature range and any pulsation or cyclic loads. these can affect sealing performance even if the static pressure is within limits. - Seal condition and installation: use appropriate sealing tape or sealant if required by the thread type and install to the correct torque to avoid leaks or thread damage. If all the above are satisfied, the Quick-connect socket plug for injection molds, DYROS is a suitable blind plug for other hydraulic systems at up to 15 bar. If any doubt remains about pressure spikes, aggressive fluids, or critical applications, consult the system designer or supplier for confirmation.

Quick-coupling socket cap for molds injection, DYROS

Additional information

Socket cap body molds for quick couplings DYROS. Available with a thread metric or BSPT. Material: brass. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DY-KP-2106	Socket cap M6x0.75	-	-	In stock	Enquiry
DY-KP-2108	Socket cap M8x0.75	-	-	In stock	Enquiry
DY-KP-2110	Socket cap M10x1	-	-	In stock	Enquiry
DY-KP-2112	Socket cap 1/2" BSPT	-	-	In stock	Enquiry
DY-KP-2114	Socket cap 1/4" BSPT	-	-	In stock	Enquiry
DY-KP-2118	Socket cap 1/8" BSPT	-	-	In stock	Enquiry
DY-KP-2125	Socket cap M12x1.5	-	-	In stock	Enquiry
DY-KP-2138	Socket cap 3/8" BSPT	-	-	In stock	Enquiry
DY-KP-2145	Socket cap M14x1.5	-	-	In stock	Enquiry