Is the Quick coupling socket for injection molds with GW and valve, DYROS series 6 compatible with both metric and BSP threaded fittings?

Yes. The Quick coupling socket for injection molds with GW and valve, DYROS series 6 is available with either metric or BSP internal threads, so it is compatible with both metric and BSP threaded fittings. The product is designed for cooling liquids in plastic processing, compressed air installations, gas cylinders and other technical fields. Materials: brass components, treated stainless steel retaining rings/springs/balls; sealing: Viton; working pressure: 15 bar.

Can Quick coupling socket for injection molds with GW and valve, DYROS series 6 be used with corrosive cooling fluids or require special precautions?

Quick coupling socket for injection molds with GW and valve, DYROS series 6 can be used with many cooling fluids but requires caution with corrosive media. Components are brass with stainlessâsteel springs/balls and Viton seals-materials resistant to many chemicals but not universally immune. Highly corrosive or aggressive fluids (strong acids, chlorinated solvents, caustics, or fluids containing halides) can attack brass, certain stainless grades, or degrade Viton over time. For corrosive fluids you should: 1) verify chemical compatibility of brass, the specific stainless steel treatment, and Viton with the fluid and temperature; 2) consider stainlessâsteel or specialâalloy alternatives if compatibility is marginal; 3) flush and inspect regularly, and replace seals periodically; 4) operate within the 15 bar limit. When in doubt, consult the manufacturer with fluid MSDS for a definitive recommendation.

Does Quick coupling socket for injection molds with GW and valve, DYROS series 6 require periodic maintenance for the valve?

Quick coupling socket for injection molds with GW and valve, DYROS series 6 does require periodic maintenance of the valve to ensure reliable operation and long service life. Recommended maintenance points: - Inspection interval: periodically check for leaks, sticking, or reduced flow; typical interval depends on usage intensity (suggested basic check every 3â6 months in standard applications). - Cleaning: flush cooling channels and valve internals if contamination, particulates, or scale are present. Use compatible fluids and avoid aggressive chemicals that damage brass or Viton seals. - Seal check/replacement: Viton sealing elements should be inspected for wear, hardening or cracking and replaced when damaged. Replace seals proactively if operating at elevated temperature/chemicals. - Stainless parts: retaining rings, springs and balls are stainless steel-treated but should be checked for corrosion, pitting or fatigue; replace if function is impaired. - Lubrication: normally not required for sealed valve internals; where recommended by process conditions, use lubricants compatible with brass and Viton. - Pressure test: after maintenance, verify valve tightness at working pressure (up to 15 bar). - Record keeping: log maintenance actions and any component replacements to establish an optimal schedule. Following these simple periodic checks and replacing worn seals/components will keep Quick coupling socket for injection molds with GW and valve, DYROS series 6 operating reliably in cooling liquid, compressed air or gas applications.

Quick coupling socket for injection molds with GW and valve, DYROS series 6

Additional information

Material	B – brass (bronze)

DYROS series 6 quick coupling socket with internal thread and shut-off valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DY-LKM610	Socket DN 6 with G1/2 M10x1, with valve	-	15	In stock	Enquiry
DY-LKM665	Socket DN 6 with G1/2 M16x1.5, with valve	-	15	In stock	Enquiry
DY-LKR614	DN 6 socket with 1/4" BSP female thread, with valve	-	15	In stock	Enquiry
DY-LKR618	Socket DN 6 with 1/8" BSP female thread, with valve	-	15	In stock	Enquiry
DY-LKR638	Socket DN 6 with 3/8" BSP female thread, with valve	-	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DYROS series 6 quick coupling socket with internal thread and shut-off valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinders, and other technical fields. Material: all components are made of brass, while the retaining rings, springs, and balls are made of treated stainless steel. Sealing: viton. Working pressure: 15 bar.