Is the Quick connector plug for injection molds with tube without valve, DYROS series 30 compatible with a 10 mm brass tube and 15 bar working pressure?

Yes. Quick connector plug for injection molds with tube without valve, DYROS series 30 is compatible with a 10 mm brass tube and 15 bar working pressure. The DYROS series 6 description specifies a plug designed for a 10 mm diameter tube, made of brass, and rated to 15 bar for cooling liquids, compressed air and similar technical uses . these characteristics match the requirements stated for the DYROS series 30 variant, so a 10 mm brass tube at 15 bar is suitable.

Can the Quick connector plug for injection molds with tube without valve, DYROS series 30 be used for cooling liquids in plastic processing with a 10 mm brass tube?

Yes. The Quick connector plug for injection molds with tube without valve, DYROS series 30 can be used for cooling liquids in plastic processing with a 10 mm brass tube if its specifications match those of the Series 6 description: brass material, 10 mm tube diameter, and a working pressure rating of up to 15 bar. Ensure the Series 30 variant explicitly lists a 10 mm brass tube, compatibility with cooling liquids, and a working pressure â¥ the system pressure; verify seals and temperature limits for your coolant to confirm safe operation.

Can the Quick connector plug for injection molds with tube without valve, DYROS series 30 be used in compressed air systems at 15 bar with a 10 mm brass tube?

Yes. Quick connector plug for injection molds with tube without valve, DYROS series 30 can be used in compressed air systems at 15 bar with a 10 mm brass tube. The DYROS series 6 description specifies a similar quick coupling plug with a 10 mm diameter tube without a valve, made of brass, and a working pressure of 15 bar; by extension, the DYROS series 30 version with the same tube diameter and materials is suitable for compressed air applications up to that pressure. Ensure the following before use: tube and fittings are rated for 15 bar, connections are properly tightened and leak-free, seals are compatible with compressed air, and the system complies with applicable safety standards and regulations. If the series 30 has any differing specifications from series 6, verify the manufacturerâs datasheet to confirm exact ratings.

Quick connector plug for injection molds with tube without valve, DYROS series 30

Additional information

Material	B – brass (bronze)

DYROS series 6 quick coupling plug with a 10 mm diameter tube without a valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DY-N308-120	Plug DN 6 with tube end 10 mm, L=120 mm, without valve	-	15	In stock	Enquiry
DY-N308-240	Plug DN 6 with tube end 10 mm, L=240 mm, without valve	-	15	In stock	Enquiry
DY-N308-360	Plug DN 6 with tube end 10 mm, L=360 mm, without valve	-	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DYROS series 6 quick coupling plug with a 10 mm diameter tube without a valve. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.