Is the Quick connector plug for injection molds with GZ without valve, L=100 mm, DYROS series 90 compatible with both metric and BSP external threads?

Yes. Quick connector plug for injection molds with GZ without valve, L=100 mm, DYROS series 90 is compatible with both metric and BSP external threads . it is available in either metric or BSP thread versions. Choose the specific thread option you need when ordering. The plug is brass, 100 mm long, rated to 15 bar and designed for cooling liquids, compressed air, gas cylinders and similar applications.

Does the Quick connector plug for injection molds with GZ without valve, L=100 mm, DYROS series 90 require special maintenance for brass material?

Quick connector plug for injection molds with GZ without valve, L=100 mm, DYROS series 90 made of brass does not normally require special maintenance beyond standard good-practice care for brass components used with cooling liquids and compressed gases. Recommended routine actions: - Regular visual inspection: check for surface corrosion, wear, deformation or thread damage and verify sealing surfaces are clean and undamaged. - Cleaning: flush with compatible liquids (water or specified coolant) and wipe external surfaces with a soft cloth; avoid abrasive cleaners or harsh chemicals that may attack brass or any plating. - Preventive flushing: periodically run the cooling medium through the coupling to prevent scale, sediment or biological growth (if using water). Use appropriate inhibitors if the coolant requires them. - Seal and thread care: inspect and replace any O-rings or seals as needed; keep threads free of debris and lightly lubricate with a compatible, non-reactive lubricant if recommended by your system maintenance procedure. - Avoid galvanic corrosion: if the plug is connected to dissimilar metals, ensure the system design or inhibitors prevent galvanic attack. - Pressure and leak checks: perform routine leak and pressure tests up to the rated working pressure (15 bar) within your safety protocol. - Storage: store dry and protected from corrosive atmospheres when not in use. If the operating fluid, environment, or regulatory requirements are unusual (e.g., aggressive chemicals, seawater, food contact, or high-temperature cycling), consult the manufacturer for specific maintenance or material suitability guidance.

Quick connector plug for injection molds with GZ without valve, L=100 mm, DYROS series 90

Q: Can the Quick connector plug for injection molds with GZ without valve, L=100 mm, DYROS series 90 be used with both cooling liquids and compressed air?

Yes. The Quick connector plug for injection molds with GZ without valve, L=100 mm, DYROS series 90 is suitable for both cooling liquids and compressed air. It is designed for cooling liquids in plastic processing and for compressed air installations (as well as gas cylinder applications and other technical fields). Made of brass and rated to a working pressure of 15 bar, it can handle typical pressures for those uses. Ensure compatibility of thread type (metric or BSP) and that system pressure and fluid/gas temperature fall within the connectorâs specifications.

Additional information

Material	B – brass (bronze)

DYROS series 90 quick coupling plug, 100 mm in length, with external thread without valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
DY-N914-100	Plug DN 9 with GZ 1/4", L=100 mm, without valve	-	15	In stock	Enquiry
DY-N918-100	Plug DN 9 with GZ 1/8", L=100 mm, without valve	-	15	In stock	Enquiry
DY-N938-100	DN 9 plug with GZ 3/8", L=100 mm, without valve	-	15	In stock	Enquiry
DY-N945-100	DN 9 plug with GZ M14x1.5, L=100 mm, without valve	-	15	In stock	Enquiry
DY-N965-100	Plug DN 9 with GZ M16x1.5, L=100 mm, without valve	-	15	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

DYROS series 90 quick coupling plug, 100 mm in length, with external thread without valve. Available with metric or BSP thread. Designed for cooling liquids in plastic processing, compressed air installations, gas cylinder applications, and other technical fields. Material: brass. Working pressure: 15 bar.