Can BSPT male threaded end, AISI 304 steel, CNP type be used with both rubber and plastic industrial hoses and secured by straps, clamps or CNFL crimping sleeves?

Yes. The BSPT male threaded end, AISI 304 steel, CNP type is specifically designed for use with both rubber and plastic industrial hoses. It features an external tapered BSPT thread and a hose âtailâ that provides a secure seat for the hose bore. Installation methods include straps, clamps or the dedicated CNFL crimping sleeves, all of which are compatible with this fitting. Made from AISI 304 stainless steel, the CNP type offers corrosion resistance appropriate for many industrial environments; however, ensure compatibility with the conveyed media, pressure, temperature and hose manufacturer recommendations before final selection.

Is BSPT male threaded end, AISI 304 steel, CNP type compatible with high-pressure industrial hose applications?

Yes - BSPT male threaded end, AISI 304 steel, CNP type Format is compatible with many high-pressure industrial hose applications, provided operating conditions fall within material and connection limits. Designed for rubber and plastic industrial hoses, it features an external tapered BSPT thread and a hose âtailâ for secure attachment. Installation options include straps, clamps, or CNFL crimping sleeves (crimping sleeves offer the most robust, pressure-resistant joint). AISI 304 offers good corrosion resistance and strength, but verify suitability against specific fluid, temperature, and pressure requirements: for very high pressures, aggressive chemicals, or elevated temperatures, consider higher-grade stainless (e.g., 316) or fittings rated explicitly for your systemâs maximum working pressure and applicable standards.

Are BSPT male threaded end, AISI 304 steel, CNP type suitable for use with fuel or oil-based fluids?

BSPT male threaded end, AISI 304 steel, CNP type is primarily designed for rubber and plastic industrial hoses and features an external tapered BSPT thread with a âtailâ for hose connection. Material: AISI 304 stainless steel. Suitability for fuel or oil-based fluids: - AISI 304 stainless steel offers good general corrosion resistance but is not specifically resistant to all hydrocarbons, fuels, or aggressive petroleum additives. For many light oils and fuels it may be acceptable, but long-term exposureâespecially to aggressive fuels, biofuels, or additivesâcan risk corrosion or stress corrosion cracking. - The CNP design is intended for installation with straps, clamps, or CNFL crimping sleeves; proper sealing and secure hose attachment are critical when handling fuels/oils to prevent leaks. - The hose material (rubber or plastic) and the sealing method are equally important: only use hoses and seals rated for the specific fuel or oil type, temperature, and pressure. Some rubber/plastic compounds are incompatible with petroleum products and will swell, harden, or degrade. - BSPT tapered threads rely on thread engagement and often a thread sealant (PTFE tape or sealant compound) to achieve leak-tightness with fluids; ensure the chosen sealing method is compatible with fuel/oil service. Recommendation: BSPT male threaded end, AISI 304 steel, CNP type can be used with fuel or oil-based fluids only if all components (AISI 304 compatibility with the specific fluid, hose material, seals, and proper installation/crimping method) are confirmed compatible and rated for the fluid, temperature, and pressure. For aggressive fuels, high temperatures, or critical safety applications, consider fittings made from more fuel-resistant stainless alloys (e.g., AISI 316) and certified hose assemblies.

BSPT male threaded end, AISI 304 steel, CNP type

All products, Low-pressure fittings and adapters/

Additional information

Material	SS – stainless steel

CNP type end with external tapered BSPT thread made of AISI 304 steel with a “tail” for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: AISI 304 steel.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
AC-CNP-050-SS	CNP end with GZ BSPT 1/2" for 1/2" hose, AISI 304	12	10	In stock	Enquiry
AC-CNP-075-SS	CNP end with GZ BSPT 3/4" for 3/4" hose, AISI 304	20	10	In stock	Enquiry
AC-CNP-100-SS	CNP end with GZ BSPT 1" for 1" hose, AISI 304	25	10	In stock	Enquiry
AC-CNP-125-SS	CNP end with GZ BSPT 1.1/4" for hose 1.1/4", AISI 304	32	10	In stock	Enquiry
AC-CNP-150-SS	CNP end with GZ BSPT 1.1/2" for hose 1.1/2", AISI 304	40	10	In stock	Enquiry
AC-CNP-200-SS	CNP end with GZ BSPT 2" for 2" hose, AISI 304	50	10	In stock	Enquiry
AC-CNP-250-SS	CNP end with GZ BSPT 2.1/2" for hose 2.1/2", AISI 304	65	10	In stock	Enquiry
AC-CNP-300-SS	CNP end with GZ BSPT 3" for 3" hose, AISI 304	75	10	In stock	Enquiry
AC-CNP-400-SS	CNP end with GZ BSPT 4" for 4" hose, AISI 304	100	10	In stock	Enquiry
AC-CNP-500-SS	CNP end with GZ BSPT 5" for 5" hose, AISI 304	125	10	In stock	Enquiry
AC-CNP-600-SS	CNP end with GZ BSPT 6" for 6" hose, AISI 304	150	10	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

CNP type end with external tapered BSPT thread made of AISI 304 steel with a “tail” for hose. Designed for rubber and plastic industrial hoses. Installation using straps, clamps, or special CNFL type crimping sleeves. Material: AISI 304 steel.