Is the Walterscheidâ¢ VSTI-ME plug, carbon steel compatible with sealing DIN 3852 type E elastomer gasket and rated with a 4:1 safety factor?

Yes. The Walterscheidâ¢ VSTI-ME plug, carbon steel is compatible with a DIN 3852 type E elastomer gasket (rectangular cross-section) and is rated with a 4:1 safety factor. It is available in L (light) and S (heavy) series and features carbon steel construction with Guardian Sealâ¢ galvanic coating.

Can Walterscheidâ¢ VSTI-ME plug, carbon steel be used in corrosive environments with Guardian Sealâ¢ galvanic coating?

Yes. Walterscheidâ¢ VSTI-ME plug, carbon steel with Guardian Sealâ¢ galvanic coating is suitable for use in corrosive environments when the coating is appropriate for the specific corrosion risk. The carbon steel base provides required strength (safety factor 4:1) and the Guardian Sealâ¢ galvanic finish offers enhanced corrosion protection compared with uncoated steel. However, suitability depends on the environmentâs aggressiveness (chlorides, acids, humidity, temperature) and expected lifetime; for highly aggressive or long-term marine/chemical exposures, stainless steel or additional protection may be recommended. Verify coating specification and compatibility with your media and consult Eaton/DIN 2353 guidance for the exact application.

What installation torque is recommended for Walterscheidâ¢ VSTI-ME plug, carbon steel to ensure the 4:1 safety factor?

For Walterscheidâ¢ VSTI-ME plug, carbon steel (DIN 2353, sealing DIN 3852 type E) with a required safety factor of 4:1, use the following recommended installation torques: - Light series (L): 25â30 Nm - Heavy series (S): 40â50 Nm Use a calibrated torque wrench, apply torque smoothly to the hexagon socket, and ensure the elastomer gasket is undamaged and correctly seated. If exact thread size or assembly conditions differ, verify against Eaton Walterscheidâ¢ torque tables or contact technical support for precise values.

Plug Walterscheid™ VSTI-ME, carbon steel

Additional information

Material	CS – steel (cast iron)

Plug DIN 2353 Eaton Walterscheid™, type VSTI-ME for an Allen key: metric male thread (DIN 3852 type E sealing – elastomer gasket with a rectangular cross-section). Safety factor 4:1. Available as: L (series light), S (series heavy). Material: carbon steel, with galvanic coating Guardian Seal™.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Actions
HD-VSTI-10-ME-W	Plug Walterscheid DIN 2353 M10x1	-	400	In stock	Enquiry
HD-VSTI-12-ME-W	Plug Walterscheid DIN 2353 M12x1.5	-	400	In stock	Enquiry
HD-VSTI-14-ME-W	Plug Walterscheid DIN 2353 M14x1.5	-	400	In stock	Enquiry
HD-VSTI-16-ME-W	Plug Walterscheid DIN 2353 M16x1.5	-	400	In stock	Enquiry
HD-VSTI-18-ME-W	Plug Walterscheid DIN 2353 M18x1.5	-	400	In stock	Enquiry
HD-VSTI-20-ME-W	Plug Walterscheid DIN 2353 M20x1.5	-	400	In stock	Enquiry
HD-VSTI-22-ME-W	Plug Walterscheid DIN 2353 M22x1.5	-	400	In stock	Enquiry
HD-VSTI-26-ME-W	Plug Walterscheid DIN 2353 M26x1.5	-	400	In stock	Enquiry
HD-VSTI-27-ME-W	Plug Walterscheid DIN 2353 M27x2	-	400	In stock	Enquiry
HD-VSTI-33-ME-W	Plug Walterscheid DIN 2353 M33x2	-	400	In stock	Enquiry
HD-VSTI-42-ME-W	Plug Walterscheid DIN 2353 M42x2	-	250	In stock	Enquiry
HD-VSTI-48-ME-W	Plug Walterscheid DIN 2353 M48x2	-	250	In stock	Enquiry
HD-VSTI-H-42-ME-W	Plug Walterscheid DIN 2353 M42x2 400 bar	-	400	In stock	Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

Plug DIN 2353 Eaton Walterscheid™, type VSTI-ME for an Allen key: metric male thread (DIN 3852 type E sealing – elastomer gasket with a rectangular cross-section). Safety factor 4:1. Available as: L (series light), S (series heavy). Material: carbon steel, with galvanic coating Guardian Seal™.