Does the Crimp end with "tail" for hose for 6 mm hoses require a specific clamp type to ensure the fitting stays in position?

Yes. The Crimp end with "tail" for hose Format for 6 mm hoses is supplied with a special clamp that keeps the fitting in the correct position, so a compatible crimp-type or retaining clamp designed for this Crimp end is required to ensure the fitting stays securely in place. Use the clamp specified for the Crimp end with "tail" for hose Format and hoses of 6 mm diameter to guarantee proper retention and leak-free performance; using a different or undersized clamp may allow slippage or compromise the seal.

What maintenance is needed to ensure the Crimp end with "tail" for hose for 6 mm hoses and its positioning clamp stay secure over time?

Crimp end with "tail" for hose (6 mm) - maintenance to keep fitting and positioning clamp secure: - Regular visual inspections (weekly initially, then monthly) for corrosion, cracks, deformation or loosening of the brass Crimp end with "tail" for hose and clamp. - Check hose-to-fitting seal: tug test and pressure test under operating conditions to detect slippage or leaks. - Verify clamp position and tension: ensure clamp remains on the designed groove/seat; re-torque or re-crimp per manufacturer spec if movement or looseness is found. - Clean assembly: remove dirt, chemicals or deposits that could accelerate wear or hide damage; use compatible cleaners for brass and hose material. - Monitor for vibration or thermal cycling: where present increase inspection frequency and consider anti-vibration supports. - Replace components on signs of wear, deformation, persistent leakage, or after a manufacturer-recommended service interval; do not reuse deformed crimped fittings. - Keep records of inspections, tests and replacements to track service life and predict preventive maintenance.

Can the Crimp end with "tail" for hose for 6 mm hoses be installed without the special positioning clamp?

No. the Crimp end with "tail" for hose Format designed for 6 mm hoses should not be installed without the special positioning clamp. The product description explicitly states it is equipped with a special clamp that keeps the fitting in the correct position; that clamp is integral to ensuring proper alignment and secure crimping on a small-diameter hose. Omitting it risks improper positioning, incomplete or uneven crimping, leakage, reduced mechanical strength, and potential detachment under pressure or vibration. For reliable, safe installation and to maintain the manufacturerâs performance and warranty expectations, use the specified special positioning clamp.

Crimp end with “tail” for hose

Additional information

Material	B – brass (bronze)

End fitting with “tail” for a hose with a diameter of 6 mm, equipped with a special clamp that keeps the fitting in the correct position. Material: brass.

List of product variants

Article number	Product variant name	DN	BAR	Availability	Price	Quantity	Actions	Catalogue
EW-151183	6 mm hose clamp end	-	-	In stock	0 zł		Enquiry

Do you need a larger quantity of products or a bespoke quote?

Call us: +48 61 653 02 22 or email us: tubes@tubes-international.com

SEND ENQUIRY

End fitting with “tail” for a hose with a diameter of 6 mm, equipped with a special clamp that keeps the fitting in the correct position. Material: brass.